1-4 of 4 Answers
Dear Sami; Place the Brother machine within range of your WPS or AOSS™ access point/router. The range may differ depending on your environment. Refer to the instructions provided with your access point/router. 1. Press the Up or Down arrow key to choose Network. Press OK. 2. Press the Up or Down arrow key to choose WLAN. Press OK. 3. Press the Up or Down arrow key to choose WPS/AOSS. Press OK. 4. When WLAN Enable? is displayed, press the Up arrow key to accept. This will start the wireless setup wizard. 5. To cancel, press Cancel or Back. 6. When the LCD shows Press Key on rtr, hold down the WPS or AOSS™ button on your wireless access point/router for a few seconds. 7. Press the Up arrow key and your machine will now automatically detect which mode (WPS or AOSS™) your wireless access point/router uses and try to connect to your wireless network. 8. If your wireless device is connected successfully, the display shows Connected. The machine will print your machine's wireless status report. If the connection failed, check the error code on the printed report. If prompted, press OK. Hope this helps.
Sorry, there was a problem. Please try again later.It is very easy. Follow the instructions on the provided CD or download installation files from the web. Set up takes less than 15 minutes.
Sorry, there was a problem. Please try again later.Press wifi button on the printer and wps button on your router. It does the rest
Sorry, there was a problem. Please try again later.I don't have Wifi at my office so can't tell you. Any computer store or Best Buy Salesman can tell you how to accomplish this.
Sorry, there was a problem. Please try again later.