A:AnswerThis is not a PC, this is just a Computer Case that includes 3 iCue LED Fans - and a LED controller for those Fans (not remote controller, it's a controller inside case that connects to motherboard)
A:AnswerThis is only the pc case and does not come with an actual computer. You will need to buy other components or just buy a prebuilt to play with the oculus rift S
A:AnswerThere is a warranty on the case and the items it came with, but you would need to reach out to Corsair about this. You could also return the case to Best Buy and swap out the entire case... I would double check all the fan connectors to ensure everything is installed correctly.
A:AnswerIf a fan is causing your computer to crash / freeze i would say it could be a bad motherboard, or power supply, but if it's the Power supply then it could be maybe you need a bigger wattage. I suggest also checking cables / plugs / making sure all cables coating are not damage.
A:AnswerYou will need was is called a fan hub or fan controller. You simply plug the 3 fans into the 4pin connectors and connect the on cable coming out of the fan hub to one of your motherboards 4pin male connectors.
A:AnswerThe hour just gives the store employees time to get it off the shelf and process the payment and everything before it gets picked up by the customer.
A:AnswerTop mount rad support is weak if existent, the mobo extends to the top of the case, and the distance from the board to the mounting holes is only 3/4"
I'd plan on front mounting or sticking with air coolers
A:AnswerYes easily. I would highly recommend if you put any cooler in this case that you put it up the front so it works as in intake. You could easily both the cooler up the front of the case behind either of the top two 120mm fans. Only caveat is that if you use the stock cooler fan you lose RGB, and if you use the stock case fan you get RGB but it's not a PWM fan so you can't control it from the cooler. You would need to replace the fan you use if you want RGB with a PWM RGB fan. Or replace all the RGB fans as they suck as they are not PWM :(