1-10 of 10 Answers
They'd be able to connect and power on and you may even be able to control the lighting if the motherboard permits the internal USB connection.
Sorry, there was a problem. Please try again later.Yes it will as long as you have a fan header you should be fine
Sorry, there was a problem. Please try again later.The PC dont matter, as long at it supports 120mm fans you will be ok. 99% of all cases support this fans so I'll say yes
Sorry, there was a problem. Please try again later.You will need an internal 2.0 USB header on the motherboard. I guess if there are 2.0 USB connectors on the case, you could unplug that and plug the fan controller in. As far as power, you will need an extra SATA connector off of the power supply. I couldn't see right away how many different connectors that power supply has.
Sorry, there was a problem. Please try again later.To motherboard yes not direct to power supply
Sorry, there was a problem. Please try again later.As long as you have 3 fan headers and an open USB slot on your desktop it will work. You could also get a fan splitter if you do not have enough fan headers on the motherboard. You will have to connect each fan into the motherboard for power and then connect the void pro and the other controller into a USB slot on the motherboard. You will also need two open SATA power slots as well to power the Void Pro and the other controller.
Sorry, there was a problem. Please try again later.These fans will work with just about any PC that has a usb header on the motherboard and the case accepts 120mm fans.
Sorry, there was a problem. Please try again later.It’s mostly dependent on the motherboard and power supply. The fan hub and node pro all connect via Sata cable, and the MB should have “system fan” connections on it. It’s rare to find a motherboard that doesn’t have this. It’s more a concern of if your power supply has the available sata cables. That being said, the power supply is something that’s pretty easy to replace if you really want too. Just make sure you buy a power supply that’s at least semi modular.
Sorry, there was a problem. Please try again later.You should be able to use them. But, you may need a fan power hub to connect this many fans. You may not have enough fan headers on your MB. Also you will need two Sata power connectors available on your power supply. One is for the RGB light hub and the other is for the Corsair link, which would need to be connected to an internal USB header on you MB as well. This is what lets you control the lighting. These are really good looking fans and super quiet as well.
Sorry, there was a problem. Please try again later.You would have to know if the power supply has enough Sata power hookups. You could also buy an adapter. Also make sure the case can support 120mm fans.
Sorry, there was a problem. Please try again later.
