“I want to update the cooling system, however I'm note sure it's possible that I can put CORSAIR-ICUE H150I 360mm into this case?”
Answer This Question
1-5 of 5 Answers
You can mount 360mm on front or top of case
Sorry, there was a problem. Please try again later.Thank you for reaching out to us. This system will allow you to install a cooler up to a 360MM either in the front or top of the case. If you have any further questions or concerns then please do not hesitate to give our tech support agents a call for any assistance; we're always happy to help. Tech Support: (855) 888-2039 [email protected] Hours of Operation: Monday - Friday: 8:30AM - 6:00PM PST Saturday: 9:30AM - 3:00PM PST -CyberPowerPC Support
Sorry, there was a problem. Please try again later.Yes, there is enough room in mine that I would mount either a front 360 or a top 360.
Sorry, there was a problem. Please try again later.That size will not fit this situation although you could remove the plastic front cover and put them there or on the top. It will not "look" perfect but you'll have great cooling which this system needs. 120mm fans are about all that fit comfortably, I added a Corsair 3 Fan kit to the inside top to help with the cooloing, along with Turning the installed 2 fan configuration in the right direction. Many suggest replacing the CPU cooling provided and it is required to at least check and make sure the CPU cooler is Correctly installed. some have videos showing the fan wires mashed in the front of the cooler so that the cooler is not touching / cooling the CPU. Check all installed Fans for their direction!!
Sorry, there was a problem. Please try again later.it may be possible to mount the cooling solution on the front of the case( remove front cover) or on the top outside of the case. there are mount points for it. (inside top mount may run into the IO panel )
Sorry, there was a problem. Please try again later.