1-1 of 1 Answer
Hi Roberto! I could not find a published spec showing the exact height of the dryer‑vent outlet (i.e., the distance from the floor to the vent collar) for the Electrolux Laundry Tower Single Unit Front Load 4.4 Cu. Ft Washer & 8 Cu. Ft Electric Dryer (model ELTE7300AW). What is available: - Overall height of the unit is 76¼ inches. - Width: 27″; Depth: 32″. - The spec sheet simply lists “Ventilation Type: Vented” but does not give the location height of the vent outlet. Recommendation: Since the vent outlet height is critical for fitting into your space, I suggest one of the following: - Measure the rough‑in where the unit will go (wall or floor) and allow some vertical flexibility since the actual vent collar on the dryer may be several inches off the back and not purely flush. - Contact the manufacturer (Electrolux) or check the full installation guide/kit for the model; sometimes that detail appears in the installer manual rather than the consumer spec sheet. - When installing, plan for typical clearances: many stacked units place the vent collar behind the dryer top section at roughly mid‑height of the dryer section, but this can vary; allow extra margin. - Maico
Sorry, there was a problem. Please try again later.