What size water line is needed for the ice maker. null

Hi there, JJ! The Frigidaire FRFG1723AV ice maker, Frigidaire specifies using a ¼‑inch (6 mm) outside diameter copper or stainless‑steel braided water line, with a ¼‑inch compression fitting to connect to the inlet valve. Recommended Water Line Specs Material: Copper or stainless-steel braided tubing (plastic tubing is not recommended) manualslib.com Outer Diameter: ¼ inch (6 mm) Fitting: ¼‑inch compression nut and ferrule. Length: Measure from the ice-maker inlet at the rear of the fridge to your shut-off valve, adding at least 6–7 ft (1.8–2 m) to allow for fridge movement. Water Pressure: Between 30–100 psi. Shut-off Valve: Install a dedicated cold-water shut-off; do not use a self-piercing valve. - Maico

“What size water line is needed for the ice maker.”

Asked by JJ 10 months ago

Answer This Question

See all questions & answers

Frigidaire - 32 in. Wide 17.6 Cu. Ft. Counter-Depth French Door Refrigerator - Fingerprint-Resistant Stainless Steel Look-Front_Standard

Save $350

$1,799.99

1-1 of 1 Answer

Hi there, JJ! The Frigidaire FRFG1723AV ice maker, Frigidaire specifies using a ¼‑inch (6 mm) outside diameter copper or stainless‑steel braided water line, with a ¼‑inch compression fitting to connect to the inlet valve. Recommended Water Line Specs Material: Copper or stainless-steel braided tubing (plastic tubing is not recommended) manualslib.com Outer Diameter: ¼ inch (6 mm) Fitting: ¼‑inch compression nut and ferrule. Length: Measure from the ice-maker inlet at the rear of the fridge to your shut-off valve, adding at least 6–7 ft (1.8–2 m) to allow for fridge movement. Water Pressure: Between 30–100 psi. Shut-off Valve: Install a dedicated cold-water shut-off; do not use a self-piercing valve. - Maico
Answered by FrigidaireSupport 10 months ago
Sorry, there was a problem. Please try again later.