Questions & Answers

Q: QuestionWill this model will replace JVM6175SF1SS as far as same dimensions and can i use the same mounting brackets that are already installed?

Asked 7 years ago by ricardo.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Stainless Steel

• A:Answer Hi Ricardo - Yes, both models have the same dimensions and use the same mounting bracket (WB56X10446). We certainly appreciate your loyalty! Sue

  Answered 7 years ago by GE Answers

  
  Helpful (4)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCan this model replace a Frigidaire model PLMV169DCB

Asked 5 years ago by SWT.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Stainless Steel

• A:Answer Hello SWT - Thank you for reaching out about this amazing microwave. We are always happy to help. Model JVM6175SKSS is a standard 30" over the range microwave and will fit in most standard cabinets. You can find the precise installation dimensions in the installation guide here: https://files.bbystatic.com/D8505xASz7TWU7wUCScjfA%3D%3D/9a6f4f78-db19-495a-8a3f-409575e5b928.pdf Please let us know if you have any more questions. - JB

  Answered 5 years ago by GE Answers

  
  Helpful (3)Unhelpful (0)ReportAnswer this question

Q: QuestionI have a JVM1870BF02 purchased in 2004 . I'm trying to find the closet match with similar features & more importantly in size and mounting. I was hoping to use the same wall bracket. I'm guessing I won't be so lucky with the top screws. Best choice?

Asked 8 years ago by Andy.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Stainless Steel

• A:Answer Hi Andy- We certainly appreciate your loyalty! The models with comparable features are GE Profile™ Series 2.1 Cu. Ft. Over-the-Range Sensor Microwave Oven PVM9215SKSS, GE Profile™ Series 2.1 Cu. Ft. Over-the-Range Sensor Microwave Oven PVM9005SJSS and GE® 1.9 Cu. Ft. Over-the-Range Sensor Microwave Oven JVM7195SKSS. All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Each microwave comes with the mounting hardware (mounting bracket, screws, exhaust adapter), top and rear templates, and installation instructions needed to make installation a simple process. This makes choosing a replacement microwave easy. NOTE: When replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used. Keep in touch! SUEatGEA

  Answered 8 years ago by GE Answers

  
  Helpful (3)Unhelpful (0)ReportAnswer this question

Q: QuestionWe just bought a ge microwave. We noticed that the surface light is extremely hot to touch. So much so I thought the stove was on. Isvthis normal?

Asked 1 year ago by Anonymous.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Stainless Steel

• A:Answer yes it is ,replaced with LED lite

  Answered 1 year ago by Anonymous

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionMy GE Microwave (JE 1540GV 002) originally made in 1996 stopped working. I certainly am happy with how long it lasted! Can you recommend a current replacement model that would work with the existing trim kit? Thank you!

Asked 4 years ago by ValZ.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Stainless Steel

• A:Answer Hello and thank you for asking. At this time there is not a direct replacement microwave and trim kit. When replacing the microwave the old trim kit is not compatible with any new model today. You will then need to replace the microwave and the built-in trim kit. You will need to modify your current cutout opening of H- 17 1/2" x 24" W. The new models would require opening of H - 17 1/8" x W 23 1/4" and the model microwave is PEB9159DJBB and then either optional 27" Built-In Kit JX9152DJBB for 27" wide cabinet or optional 30" Built-In Kit JX9153DJBB. Hope this helps. Geoff@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: Question1.How many stove light bulbs are under the microwave? Do the stove lights have a bright and dim option? What type of bulbs? 2.Can it vent to the front? We can't vent to the back or the up the cabinet, and don't want to keep up with filters. Thanks!

Asked 4 years ago by Frannie.

• A:Answer Hi - Thank you so much for your interest in this beautiful fingerprint resistant over-the-range microwave oven. This model offers a single 30 watt halogen bulb that sits between the two grease filters on the underside of the unit. It offers a bright and night light setting. This model offers three venting options. It can be vented to the outside through the top or back. It can also be converted to internal, recirculating venting. With this venting method, the blower is turned and a charcoal filter is installed. The air is then directed through the charcoal filter to remove odors and grease prior to be vented back into your kitchen. We recommend the charcoal filter be replaced every 6 months and this model does have a Filter Reset light to remind you to do so. We do hope you choose GE for your home. Vikki@GEA

  Answered 4 years ago by GE Answers

  
  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: QuestionOur LVM1750SM1SS has stopped working. Which current GE model uses the same or similar mounting brackets. I am looking for an easy replacement.

Asked 5 years ago by JeffT.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Stainless Steel

• A:Answer Hi there, JeffT - Great question! We found a comparable model that we believe will make a great replacement. We suggest microwave model JVM6175YKFS. When replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used. Thanks for checking! -Mikayla@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionAre there any differences between this model (JVM6175SKSS) and the JVM6175YKFS aside from the fingerprint resistant stainless steel?

Asked 5 years ago by Natalie.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Stainless Steel

• A:Answer Hi Natalie! Based on what we're able to see, the only difference between these two models is that one (JVM6175SKSS) has a normal Stainless Steel finish and the other (JVM6175YKFS) has a Fingerprint Resistant finish. Hope this helps! Best wishes. -Michael@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionReplacing my old GE over the stove microwave mode JVM1740DM1BB, with this model fit?

Asked 5 years ago by Michelle09.

• A:Answer We bought this to replace our old GE over the stove microwave and it fit perfectly. To be honest, when it first arrived, it looked much bigger but my husband had measured and said that it would fit perfectly. It did!

  Answered 5 years ago by samm

  Helpful (2)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWe are replacing our GE Microwave JVM1750SP2SS after 8 years with this GE one, will it use the same bracket ? It's also about gas range. Nice price and we selected the standard installation since it's a replacement with the same measurements. Thanks

Asked 6 years ago by Woody.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Stainless Steel

• A:Answer Hi Woody - Thanks for reaching out to us and for your loyalty! We are sorry to hear your 8 year old GE Microwave JVM1750SP2SS is no longer working and apologize for any inconvenience this has caused. Also, all GE 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Therefore, any of our 30" over-the-range models will work as a replacement for your existing 30" model JVM1750SP2SS. However, when replacing an over-the-range microwave, the mounting bracket included with the new microwave should be used since the mounting bracket is specific to each model. The new screws, bolts, and exhaust adapter should also be used. Thank you for making GE Appliances a part of your home! Keep in touch. Sue

  Answered 5 years ago by GE Answers

  
  Helpful (2)Unhelpful (0)ReportAnswer this question

Q: QuestionI have a red filter light on stating to reset filter hold 3 seconds hold what 3 seconds its less than a year old the installers left no paper work regarding instructions model JVM6175DK2WW

Asked 7 years ago by swampy.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - White

• A:Answer on my model microwave, the right had side control panel has a reset button The button says: Reset Filter Hold 3 sec

  Answered 7 years ago by BruceVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionMy GE Spacemaker, model #JVM1630WB 004, quit working after 17 years! Pretty impressive!!! What would be a good replacement in terms of dimension and function? Thanks.

Asked 8 years ago by Yadni34.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - White

• A:Answer Hi Yadni34 - We certainly appreciate your loyalty! It is great to hear your microwave provide you with great service for 17 years. We suggest to view our GE® 1.9 Cu. Ft. Over-the-Range Sensor Microwave Oven JVM7195DKWW and GE® 1.7 Cu. Ft. Over-the-Range Sensor Microwave Oven JVM6175DKWW. Model JVM7195DKWW has a dark gray, easy-clean enamel interior with Steam Clean option. Steam Clean feature generates steam to re-hydrate dried spills/splatters making cleaning easier. Enjoy! SUEatGEA

  Answered 8 years ago by GE Answers

  
  Helpful (2)Unhelpful (1)ReportAnswer this questionShow more answers (2)

Q: QuestionI have a GE Profile model PVM1870SM1SS that needs to be replaced. What GE microwave best fits in the same space? Will this model fit?

Asked 8 years ago by Gardner.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Stainless Steel

• A:Answer Hello Gardner! The great thing about 30" over-the-range GE microwaves is that they are a standard width. The JVM6175SKSS is a good replacement for your previous model - it is close in capacity and features. Thanks for your continued interest in GE Appliances! LEDA@GE

  Answered 8 years ago by GE Answers

  
  Helpful (12)Unhelpful (10)ReportAnswer this question

Q: QuestionHello. Our current model GE # PVM1970SR1SS has been discontinued. We would like to replace with the GE model # JVM6175SKSS Will this fit correctly over our range? Thank you!

Asked 8 years ago by RDmicro.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Stainless Steel

• A:Answer Hi RDmicro- We certainly appreciate your loyalty! Thank you for making GE Appliances a part of your home. Yes, all 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Each microwave comes with the mounting hardware (mounting bracket, screws, exhaust adapter), top and rear templates, and installation instructions needed to make installation a simple process. This makes choosing a replacement microwave easy. Model PVM1970SR1SS is approximately 29 7/8"W x 16 7/8"H x 15 7/8"D. Model JVM6175SKSS is approximately 29 7/8"W x 16 1/2"H x 15"H. If you are interested in the dark gray, easy-clean porcelain enamel interior with Steam Clean feature, we suggest our GE® 1.9 Cu. Ft. Over-the-Range Sensor Microwave Oven JVM7195SKSS. The Steam Clean feature generates steam to re-hydrate dried spills/splatters making cleaning easier. It is approximately 29 3/4"W x 16 1/2"H x 15 1/2"D. Keep in touch. With so many choices, we are always glad to help make your buying decisions a bit easier! SUEatGEA

  Answered 8 years ago by GE Answers

  
  Helpful (2)Unhelpful (1)ReportAnswer this questionShow more answers (1)

Q: QuestionCan this model replace my old model HVM1750DP1WW? My key pad shorted on my older model from 2013.

Asked 3 weeks ago by sheila.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Stainless Steel

• A:Answer We appreciate your loyalty to our brand. Model JVM6175SKSS has similar dimensions as your older model; the dimensions are 16.3125" H x 29.875" W x 15.5625" D for JVM6175SKSS and 16 1/2" H x 29 7/8" W x 15 1/4" D for HVM1750DPWW. The mounting space requirements are similar. For model JVM6175SKSS, the cabinet the microwave is installed under should have a depth of 13" maximum for standard installation; a deeper depth would require an additional kit. We recommend reviewing the installation instructions for the new model; those can be viewed on Best Buy's product page for the microwave, when you go to the 'Features' section and scroll to the bottom. As long as you're able to meet all the installation requirements, we're confident model JVM6175SKSS would be a great fit for your needs!

  Answered 3 weeks ago by GE Answers

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionGE microwave JVM6175DF1WW Is what I’m looking to replace however I was informed it was discontinued. Do you know what microwave replaced this model ?

Asked 1 year ago by Chelle.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Stainless Steel

• A:Answer Thank you for checking with us. We are sorry to hear that your model JVM6175DF1WW has been discontinued. However, a great match to this model would be the JVM6175DKWW. If we can help with anything else let us know!

  Answered 1 year ago by GE Answers

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionIs the inside of this microwave white? I can't find any pictures of what the color is inside. Thank you

Asked 2 years ago by star.

• A:Answer The one we physically saw in Best Buy showroom had a black interior. We had the option of black or white interior when ordering and chose white. If ordering online, make sure you have the option to specify what interior color you want.

  Answered 2 years ago by AnonymousVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (3)

Q: QuestionWe want to replace our GE Spacemaker XL microwave Model JVM1340WW002 and would like to know if Model JVM6175YKFS is the same size. Thank You!

Asked 3 years ago by Sunny.

• A:Answer The most important dimension is the width. Sure, the height of the JVM6175 is a tee bit shorter at .3125 " compared to .5 " on the JVM1340, and the depth is a whopping 1.5625" sticking out, but it should fit if you can live with it. Other things to consider that may need modifications would be new holes for mounting screws and exhaust vent. JVM1340 Dimensions: 16 1/2 H x 29 7/8 W x 14 D https://www.geappliances.com/appliance/GE-SpacemakerXL-Microwave-Oven-with-SmartControl-System-and-Convenience-Cooking-Controls-JVM1340AW JVM6175YKFS Dimensions: 16 5/16 H x 29 7/8 W x 15 9/16 D https://www.geappliances.com/appliance/GE-1-7-Cu-Ft-Over-the-Range-Sensor-Fingerprint-Resistant-Microwave-Oven-JVM6175YKFS

  Answered 2 years ago by LanceVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionI am trying to replace GE Profile Spacemaker® XL 1800 36" Microwave Oven Model #: JVM3670SK Does this microwave work? Are there other choices as well? This is the biggest pain!!!

Asked 3 years ago by MammaC.

This question was asked about the related product: GE - 1.7 Cu. Ft. Over-the-Range Microwave with Sensor Cooking and Defrost - Stainless Steel

• A:Answer Hi, Thanks for taking the time to reach out. All of our over the range microwaves are designed to fit in the same space. This makes choosing a replacement a breeze. However, you will need to use the mounting kit that comes with the model. This is because the kit is made specifically for that model. So yes, this microwave will work. You will also need the filler kit since our units are made for 30" openings. The filler kit will allow it to fit into 36" openings. The filler kit for this model is JX36BSS. Have a great day! Mike@GEA

  Answered 3 years ago by GE Answers

  
  Helpful (1)Unhelpful (0)ReportAnswer this question