Questions & Answers

Q: QuestionWill this work for Model ZHU36RSJ1SS induction stove?

Asked 5 years ago by CraigV.

• A:Answer Hi there! Thanks for your question. We're not seeing this trim kit associated with this cooktop, we're sorry about that. This cooktop does have an optional flush mounting kit available to it if you're interested. The part number for the flush mounting kit is: JXFLUSH1. We hope this helps and that you're staying safe. -Michael@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHave a GE Cafe white matte is there a filler in white?

Asked 5 years ago by Pam.

This question was asked about the related product: GE - 30" Slide-in Range Filler Kit - Stainless Steel

• A:Answer Hello there! Thanks for your question and for being part of the GE Appliances family. Can you please reach out to us at our social page with your question and model number of your range so we can look into this further for you? Stay safe. Emily@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this trimkit work with GE product JSS86SPSS?

Asked 5 years ago by Heather.

• A:Answer Hi there, Heather - Great question! We're finding that this trim kit is compatible with range JSS86SPSS. Thanks for checking! -Mikayla@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHello- I have purchased a GE Profile dual fuel range (P2S930SELSS) to be installed in April. Will this trim kit work to cover the slight gap between the range and the counter top? Can the Best Buy installer do this at the time of installation?

Asked 5 years ago by Paul.

This question was asked about the related product: GE - 30" Slide-in Range Filler Kit - Stainless Steel

• A:Answer Hi Paul, Thanks for the question! We first want to congratulate you on your new GE Appliance. We appreciate your business, and would be happy to help you find a filler kit. The specific model you are considering (JXFILLR1SS) is the correct kit for your range. We're glad we could help you today, and if there are any more questions please ask! -Sylvia@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI'm looking for a slide-in range REAR filler kit for my new 30"-wide Kitchenaid gas range. Nowhere does it list the width of these trim pieces (!).

Asked 5 years ago by Anonymous.

This question was asked about the related product: GE - 30" Slide-in Range Filler Kit - Stainless Steel

• A:Answer Hello and thank you for your interest in our appliance accessories. The dimensions of these trim pieces are 1/4" H x 5/8" W x 1/4" D. However, we do not test them with other manufacturer's products so we cannot guarantee they will be compatible with your appliance. Thanks! - John@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work with a standalone range as well? If not, is there a product that will?

Asked 5 years ago by Carleen.

This question was asked about the related product: GE - 30" Slide-in Range Filler Kit - Stainless Steel

• A:Answer Hi Carleen, thanks so much for your question! This trim kit is deigned for some select slide-in ranges. We would not recommend using it for a free-standing range. In order to check to see if there are any similar parts for the range in question, we'd need the complete model number of that range. Please feel free to send us an email or reach out to us on social media with this information. We hope that this helps and that we hear from you soon. Stay safe! -Michael@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this kit work for 36" GE induction cooktop?

Asked 5 years ago by CAB1.

• A:Answer Hi CAB1, thanks for your question! To determine if this trim kit will work with your cooktop, we would need the complete model number of your cooktop. The trim kit that you've provided looks to be suited for a slide in range. Feel free to send us an email or reach out to us on social media with your complete model number and we'll take a look into this for you. Hope to hear from you soon. Stay safe. -Michael

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work with GE model #JGS760EEL4ES.

Asked 5 years ago by Hawkeye.

• A:Answer Hello Hawkeye, Thanks so much for reaching out. We're glad to help. This trim kit will fit, however we recommend JXFILLR1DD as it will better match the slate color of the range. We hope this helps. Best wishes. Mike@GEA

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionJust had a GE Gas Range put in. Im looking for a filler strip for my slider oven, JGSS66SEL3SS. My old oven had slip strips that came with the oven, not this one. Do you have anything available . Thank you.

Asked 5 years ago by Mag6162.

• A:Answer Hi Mag6162, thanks for your question! There is an optional trim kit for this range if you'd like to purchase one! The part number for that trim kit is as follows: JXFILLR1DD. There is also a Stainless Steel version of this trim kit here: JXFILLR1SS. We hope that this helps! Stay safe. -Michael

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDo they have the "Filler Kit" for the regular, Non-Black Slate model? If not, what are folks using for this range; I cannot finde the color Slate for my range?

Asked 5 years ago by JS660SLFillerKit.

• A:Answer Hello JS660SLFillerKit, Thank you for reaching out. We are finding that JXFILLR1BB is the only filler kit option available for model JS660SLSS. Hope this helps. Best wishes -Mike

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWHY the heck did GE Stop with the trim on the edge of the slide in ranges? I have it now and it is fabulous - cause of this reason I am searching other brands. I know about the trim kits you sell and quite frankly they are ugly! BRING IT BACK

Asked 5 years ago by DUNN.

• A:Answer Hi DUNN - Thanks for reaching out to us! Your comments and concerns regarding the newly designed slide-in ranges are important to us. Starting in September 2017, we are offering electric, gas, and dual fuel front control slide-in ranges with no overhang, an edge-to-edge cooking surface, and color matched finished sides. No overhang simplifies installation, especially with countertop less than or more than 36", can be installed with counters with beveled edges and allows better fit and appearance with ADA countertops (usually 34"H). Also, the sides are now finished so no added cost for side panels. Again, thanks for sharing your thoughts with us. If you have any additional questions, we are also happy to help at GEAppliances.com! Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan this be used on any brand of slide in range where there is a gap on sides between range and countertop?

Asked 5 years ago by Bausmad.

This question was asked about the related product: GE - 30" Slide-in Range Filler Kit - Stainless Steel

• A:Answer Hi Bausmad - Thanks for your interest! Filler Kit Model JXFILLR1SS is designed for use with select GE Slide-in Ranges and has not been tested or approved for use with other brands. If you have any additional questions, do not hesitate to ask, we are also happy to help at GEAppliances.com! Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this trim kit (GE 0.6") compatible with a GE Cafe 30" Smart Slide-In, Front Control, Induction and Convection Double-Oven Range (Model # CHS950P2M1S1)?

Asked 5 years ago by manic123.

• A:Answer Hi manic123 - Thanks for choosing Cafe! Model # CHS950P2M1S1 is compatible with Trim Kit JXFILLR1SS (stainless) or JXFILLR1BB (Black). Also, we suggest viewing the Quick Specs document at the following link: https://products.cafeappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=CHS950P4MW2_18.7.19.pdf - We're glad to have you in the family. Explore our Café Customizable Professional Collection at: https://www.cafeappliances.com/collections/customizable-professional - Keep in touch! Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: Questionwill this kit fit GE electric range model:#JS760SLSS. Thank you so much.

Asked 6 years ago by Frank.

• A:Answer Hi Frank - Yes, Model:JXFILLR1BB is compatible with model:#JS760SLSS. Thanks for choosing GE. Enjoy! Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionAre these re-usable? If we intend to get new countertops in the next few years, would we be able to move this trim to the new countertops with the existing adhesive? Thank you.

Asked 6 years ago by OnlineSchool.

This question was asked about the related product: GE - 30" Slide-in Range Filler Kit - Stainless Steel

• A:Answer Hi Jane - The adhesive on the JXFILLR1 is designed for one time use. If new countertops are installed in the future, we recommend purchasing a new JXFILLR1 kit. Thanks for choosing GE. Enjoy! Sue

  Answered 5 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this product compatible with all GE gas ranges?

Asked 6 years ago by Dee.

• A:Answer Hi Dee - JXFILLR1BB is compatible with "L" series slide-in models manufactured in (or after) Sept 2017. So that we can better assist you, please provide us with the model number of your GE range. You can also contact us at GEAppliances.com for all your appliance needs. Keep in touch! Sue

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionFor a GE dishwasher the rubber molding is hanging out on the right side since there is not a cabinet next to it. My question is can the overlapping piece be cut back a little from top to bottom just on that one side? Thank you!

Asked 6 years ago by Dani.

• A:Answer Hi Dani - Thanks for choosing GE! Yes, the tub filler piece on the right size can be cut for a better fit. When the door is closed, there is a gap between the door and the tub. These filler (trim) strips are used to fill that gap and provide a more finished look. By filling in the gap, this also helps reduce the normal sounds that a dishwasher makes, therefore making it more quiet. Keep in touch at GEAppliances.com. Sue

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHow big of a gap on each side of the stove will the trim pieces cover?

Asked 6 years ago by Brent.

• A:Answer I think they cover up to 3/8 of an inch on each side. Should be plenty unless cutout was sloppy.

  Answered 5 years ago by BoblVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhat are these made of?

Asked 6 years ago by Sammy.

• A:Answer Hello Sammy - Thank you for reaching out about our trim kit. We are happy to help. The base material for this kit is aluminum with an anodized (color matched) coating. Please let us know if you have any more questions. - John

  Answered 6 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question