“What does itean when the screen says FL and is blinking and won't run and shuts off right away”

1-5 of 5 Answers

• The machine needs to be emptied of water. There is a drain valve in the back of the unit, centered towards the bottom.

  Answered by Smith021 3 years ago

  • Verified Purchase
  • 

  Helpful (3)Unhelpful (0)

  Report

  Sorry, there was a problem. Please try again later.

• Full

  Answered by JessicaS 2 years ago

  • Verified Purchase
  • 

  Helpful (0)Unhelpful (0)

  Report

  Sorry, there was a problem. Please try again later.

• The condensation overflow is full of fluid(FL) and needs to be emptied.

  Answered by Derrty 2 years ago

  • Verified Purchase
  • 

  Helpful (0)Unhelpful (0)

  Report

  Sorry, there was a problem. Please try again later.

• You have to drain lower port due to ut is filled with water.

  Answered by Craig 3 years ago

  • Verified Purchase
  • 

  Helpful (0)Unhelpful (0)

  Report

  Sorry, there was a problem. Please try again later.

• Hello. Thanks for reaching out to us! The FL error code is the water full indicator code. To fix the error, you will have to empty the tank. To empty the internal water tank: 1. unplug/disconnect power 2. place a shallow 1 quart or larger pan below the lower drain located on the back of the air conditioner 3. remove the cap and the rubber plug and drain the water tank 4. re-insert the drain plug and screw the cap snugly into place 5. plug in or reconnect cord. We hope this information helps, and should you have any additional questions, please reach out to us!- Kianna@GEA

  Answered by GE Answers 3 years ago

  Helpful (0)Unhelpful (0)

  Report

  Sorry, there was a problem. Please try again later.