A:AnswerHello there - thank you for reaching out! This slide-in gas range does not have a downdraft venting system. We recommend installing a matching hood or over-the-range microwave with this model. Let us know if you have any questions or concerns in the future - we are always happy to help! Best, Kelsey@GEA
A:AnswerHello and thanks so much for the interest in this beautiful range. The range itself does not vent through ducts and will release hot air into the kitchen. Standard kitchen ranges like this do not require overhead ventilation in most regions, if you have at least 30 inches from the cooktop to any combustible surface above. We do suggest checking your local codes. We hope this helps. - John@GEAppliances
A:AnswerHi - Thank you for your interest in this beautiful GE gas range. With the leveling legs all the way in, the distance from the floor to the bottom of the handle is 29-1/8”. While we do not have a picture of the back of the range we can provide, you can find the "shaded area" which identifies the proper location for the gas and electrical supply on Page 2 of the Installation Instructions. We do hope you choose GE for your home. All our best! Vikki@GEA
A:AnswerHi! Thanks for asking, we can understand wanting to check on this. In this case, we'd recommend reaching out to your installer to make sure that all of the connections are properly made and that the unit has been hooked up properly. If you continue to have issues after having the installation checked, we'd recommend reaching out to service. Hope this helps! Best wishes. -Michael@GEA
A:AnswerHello, thank you for your question. Yes, this rear trim piece is to ensure proper air flow around the range so that it is able to function optimally. If you would like to read more about the installation instructions, you can do so on our website. We hope this helps! -Chris@GEA
A:AnswerHello, thank you for your question. Yes, the rear trim piece for this required. The rear trim helps ensure proper air flow is achieved so that the range can perform optimally. We hope this helps! Please feel free to reach out with any further questions or concerns. -Chris@GEA
A:AnswerIt’s important and part of building codes in many cities to safely remove fumes and grease from cooking. Venting can be achieved under counter or side walls and hanging across ceiling and always allow space for cleaning
A:AnswerI’m not aware of any stoves having a built in to vent out the fumes from stove top cooking although a real good idea but unpractical due to liability from grease buildup.. All stoves have venting to cool off the oven but few require ducted systems
A:AnswerHi,
Great question! We thank you for your consideration towards GE Appliances, and would be happy to provide an answer. We do like both stainless steel and slate finishes, in order to choose a range, we suggest finding what would match your kitchen the best. Both are great options and we appreciate your interest in this range. Just know that whichever finish you choose will make great addition to your home.
We hope this answer helps, and we thank you again for choosing GE Appliances.
Good Luck!
-Sylvia@GEA
A:AnswerHi, thanks for reaching out to us! We truly appreciate you choosing this slide-in gas range for your home and are sorry to hear of the issues you are experiencing with your griddle. We are happy to help you with this. Your range comes with the non-stick aluminum griddle (part WB31X24738), which can be viewed through GE Appliance Parts. They will be able to answer any questions you may have about this replacement. We hope that this helps! -Eliza@GEA
A:AnswerHello Eb - We're so happy to hear about your interest in this spectacular range. It's a pleasure to tell you all about it.
Model JGSS66SELSS is made globally. You can find the specific place of manufacture on the rating plate of the appliance. For the oven, it can reach temperatures of up to 550 degrees F. Stay safe and keep in touch! - John@GEA
A:AnswerHi there - Great question! No, this range is not available in 36". We'll be sure to share this with our product design team for future consideration. Thanks for checking! -Mikayla
A:AnswerHi jebany,
We appreciate you reaching out and are happy to answer your question. The width of this oven is 30 inches. We hope this helps. Best wishes -Mike@GEA
A:AnswerHello sIDPANEL - These ranges are designed to fit into a freestanding range cut-out. These slide-in ranges have finished sides, so they do not need a side body panel kit. Slate, Black Slate, Stainless, and Black Stainless slide in ranges have dark gray sides. - Trey@GEA
