1-1 of 1 Answer
To install a new water filter, first remove and discard the plastic cap from the new filter. Fill the top of the replacement filter with water from the tap. Place the filter inside the cartridge holder by aligning the arrow on your filter with the cartridge holder. If there is no arrow on the cartridge holder too, just make sure the filter is facing forward when inserted. Push the filter gently upward to engage the top of the cartridge in the filter head. Then, slowly turn the filter to the right until the filter cartridge stops turning. As you turn the cartridge, it will automatically rise into position. After the filter has been replaced, trapped air must be purged out of the system. Select Water on the dispenser selector and press the pad until water begins to flow. The first few ounces of water may sputter due to air in the replacement filter. This is normal. Continue to dispense approximately 1-2 gallons of water to make sure all air is purged from the system.
Sorry, there was a problem. Please try again later.