Questions & Answers

Q: QuestionCan you recommend a replacement under cabinet microwave with same dimensions and quality? I have had the GE Spacemaker XL 1800 (GE Profile) and it is no longer working. (JVM1860SD001).

Asked 8 years ago by Jenn.

• A:Answer Hi Jenn- We certainly appreciate your loyalty! All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Each microwave comes with the mounting hardware (mounting bracket, screws, exhaust adapter), top and rear templates, and installation instructions needed to make installation a simple process. This makes choosing a replacement microwave easy. We suggest to view GE Profile™ Series 2.1 Cu. Ft. Over-the-Range Sensor Microwave Oven PVM9215SKSS and GE® 1.9 Cu. Ft. Over-the-Range Sensor Microwave Oven JVM7195SKSS. Also, check out our GE Profile Series Over-the-Range Oven with Advantium® Technology PSA9120SFSS. Speedcook technology (120V) allows you to enjoy oven-quality results two- to four- times faster than a conventional oven. Multiple cooking functions include Broil, Convection, Microwave, Proof, Speedcook and Warm. Over 175 Preprogrammed selections make meals easy. Play Video: https://www.youtube.com/embed/7R5FsE1PPZM?rel=0 - Keep in touch! SUEatGEA

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat trim kit goes with this slate profile series 2.2 Cu. Ft. Full size microwave?

Asked 8 years ago by Mert.

This question was asked about the related product: GE - Profile Series 2.2 Cu. Ft. Full-Size Microwave - Slate

• A:Answer Hi Mert- GE Profile™ Series PEB7226EHES is compatible with GE® Optional 30" Built-In Trim Kit JX7230EHES and GE® Optional 27" Built-In Trim Kit JX7227EFES. We suggest to view the Quick Specs at the following link for product dimensions and cabinet cutout requirements: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=240379_peb7226sf_c2.pdf - Thanks for choosing GE. Enjoy! SUEatGEA

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDo you have any countertop microwaves that have optional on/off turntable?

Asked 8 years ago by Pansy.

• A:Answer Hi Pansy- GE Profile™ Series 1.1 Cu. Ft. Countertop Microwave Oven PEM31SFSS offers Turntable On/Off option. Enjoy! SUEatGEA

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have understood the GE PEB7226SFSS is not longer being manufactured. Is there a replacement with the same dimensions? I'm trying to use the same trim kit.

Asked 8 years ago by RMG.

• A:Answer Hello RMG, Thank you for your interest in GE Appliances. I am happy to help. The new model is PEB7227SLSS. The new model will not work with your current trim kit. You will need to look at one of the models below: JX7227SLSS (Stainless steel) (27 inches); JX7230SLSS (Stainless steel) (30 inches). I hope this helps. Thank you for your interest. Lisa from GE Appliances.

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhen is this model going to be available? GE Profile Microwave PEB7226SFSS and 30 inch trim kit

Asked 8 years ago by Microwave.

Q: QuestionWe are remodeling our kitchen and have the GE Profile micro convection built in with a 30" trim kit that has a slight curve on top and bottom. peb1590sm2ss Is it possible to find a trim kit that is 27" that is exactly rectangular with no curve?

Asked 8 years ago by GR21.

• A:Answer Hi GR21- We certainly appreciate your loyalty. Microwave trim kits are not interchangeable. PEB1590SM2SS is compatible with 27" Built-In Trim Kit JX1527SMSS and 30" Built-In Trim Kit JX1530SMSS. The current model is GE Profile™ Series 1.5 Cu. Ft. Countertop Convection/Microwave Oven PEB9159SJSS. It is compatible with 27" Built-In Trim Kit JX9152SJSS and 30" Built-In Trim Kit JX9153SJSS. These do not have the curve design. Check out the Quick Specs for details at the following link: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB9159SJSS_R2.pdf - Keep in touch! SUEatGEA

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI have an opening of 25 1/2" wide, 15 1/2" High and 23" deep above my wall oven. I had a Kitchen Aid model with a trim kit that I want to replace. Will this fit and what trim kit should I buy? Stainless Steel

Asked 8 years ago by Ira.

• A:Answer Hi Ira- When installed in a cabinet, the cutout requirement is approximately 25 1/2" Width x 16 3/4" Height x 19 1/2"- 22" Depth. It is compatible with GE® Optional 27" Built-In Trim Kit JX7227SFSS or GE® Optional 30" Built-In Trim Kit JX7230SFSS depending on your cabinet size. We encourage you to view the Quick Specs at the following link for more details: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=240379_peb7226sf_c2.pdf - Thanks for viewing GE! SUEatGEA

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionReplacing a GE ZEP1226SH2SS. Can't find that model on line. What is comparable to this in size. Need stainless stell.

Asked 8 years ago by dian68.

• A:Answer Hi dian68- PEB7226SFSS is compatible with GE® Optional 27" Built-In Trim Kit JX7227SFSS and GE® Optional 30" Built-In Trim Kit JX7230SFSS. The Quick Specs at the following link provides dimensions and cabinet cutout requirements: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=240379_peb7226sf_c2.pdf - We certainly appreciate your loyalty! SUEatGEA

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionGE over the stove builn-in microwave model PEB726SF1SS is not working - can you sugest matching replacement model for it we can buy from retrail store

Asked 8 years ago by REPLACEMENTFORPEB726SESS.

• A:Answer Hi REPLACEMENTFORPEB726SESS- We certainly appreciate your loyalty! GE Profile™ Series 2.2 Cu. Ft. Countertop Microwave Oven PEB7226SFSS is the replacement model for PEB7226SF1SS. You can also view the Quick Specs at the following link: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=240379_peb7226sf_c2.pdf - Thanks for reaching out to us! SUEatGEA

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionOur PEB2060SM2SS Profile series microwave just died. I want replace it with either a GE PEB7227SLSS or a PEB7226SFSS model. Are these the correct replacements for the deceased model and is the existing trim kit compatible with both?

Asked 8 years ago by jeff.

• A:Answer Hi Jeff- Thank you for making GE Appliances a part of your home! We know you have choices and appreciate the trust you've placed in us. PEB7227SLSS (new) and PEB7226SFSS are the comparable models. However, you will need to purchase the appropriate trim kit since they are not interchangeable. PEB7227SLSS is compatible with 27" Built-In Kit JX7227SLSS and 30" Built-in Kit JX7230SLSS. Appearance upgrades on this new model include extended window, less noticeable gap between unit and trim, glass touch controls to match most wall oven controls. View Quick Specs: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB7227SL_BL_R2_17.pdf - PEB7226SFSS is compatible with 27" Built-In Trim Kit JX7227SFSS and 30" Built-In Trim Kit JX7230SFSS. View Quick Specs: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=240379_peb7226sf_c2.pdf - A trim kit consists of the trim frame, as well as an upper, lower, and rear duct that attaches to and encases the microwave inside the cabinet cut-out so it is important to only use the trim kit designed for that model. Keep in touch. With so many choices, we are always glad to help make your buying decisions a bit easier! SUEatGEA

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionneed to replace microwave #JE2160SF03 built in over oven. What model replaces the old one?

Asked 8 years ago by tori.

• A:Answer Hello Tori - Here is the current model that replaced model JE2160SF03: https://www.bestbuy.com/site/ge-1-5-cu-ft-mid-size-microwave-stainless-steel/5527522.p?skuId=5527522. -TREY@HAIER

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionMy JEZ2160SF03 microwave just died - to be able to match our wall unit oven we need to replace it with the Monogram ZEB1226SHSS. Will our existing trim kit JX2130 fit?

Asked 8 years ago by ROB.

• A:Answer Hi Rob- Good question; Typically the trim kits are not interchangeable. It is important to refer to the specs of your new model to select the right trim kit option. (The trim kit accessory are sold separately) To order accessories through the GE Appliance Parts Store you can call our Parts Team at 1-877-959-8688 or order on-line by visiting: https://www.geapplianceparts.com/store/ Thanks for checking with Us Kaye@GE

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (2)

Q: QuestionI need to replace my GE microwave JE2160SF01 with built in trim JX2130SH. Will this model work with my built in?

Asked 8 years ago by Rozz.

• A:Answer Hello Rozz - This model will work as a replacement. However it requires the following trim kit: https://www.geapplianceparts.com/store/parts/spec/JX7230SFSS. -TREY@GEA

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionI plan to buy the model PEB7226SFSS. What trim kit I should buy, 30" Deluxe or 27" Deluxe trim kit?

Asked 8 years ago by Danjie.

• A:Answer Hi Danjie- Thanks for choosing our GE Profile™ Series PEB7226SFSS! This microwave is compatible with GE® Optional 30" Built-In Trim Kit JX7230SFSS and GE® Optional 27" Built-In Trim Kit JX7227SFSS. The only difference between the 27" and 30" trim kit is the trim frame. If the microwave is installed over a 27" or 30" wall oven, be sure to match the trim kit width to the oven. Check out the Quick Specs: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=240379_peb7226sf_c2.pdf- Also, the Trim Kit Installation Instructions are available online at: https://www.myapstore.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=49-40727.pdf - Thanks for checking with us. Enjoy! SUE@GEA

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questioni have a ge profile peb1590sm2ss microwave that needs to be replaced. I also have the trim kit to match. What new model can I use as well as use the exiting trim kit? Thanks Hank

Asked 8 years ago by Frank.

• A:Answer Hi- We certainly appreciate your loyalty! The latest model is our GE Profile™ Series 1.5 Cu. Ft. Countertop Convection/Microwave Oven PEB9159SJSS. It is compatible with Microwave Optional 30" Built-In Trim Kit JX9153SJSS and Microwave Optional 27" Built-In Trim Kit JX9152SJSS. A trim kit consists of the trim frame, as well as an upper, lower, and rear duct that attaches to and encases the microwave inside the cabinet cut-out. It is important to only use the trim kit designed for that model. Trim Kits are not interchangeable. Check out the Quick Specs at the following link for details: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=PEB9159SJSS_R2.pdf - Thanks for checking with us! SUE@GEA

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questioncan I use the new trim kit jx7230slss with the peb7226sfss microwave

Asked 8 years ago by teresa.

• A:Answer Hi Teresa- Thanks for choosing our GE Profile™ Series PEB7226SFSS! No, the microwave is compatible with GE® Optional 30" Built-In Trim Kit JX7230SFSS. A trim kit consists of the trim frame, as well as an upper, lower, and rear duct that attaches to and encases the microwave inside the cabinet cut-out. It is important to only use the trim kit designed for that model. Thanks for checking with us. Enjoy! SUE@GEA

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs there an over the range microwave convection oven made today that is comparable in size to the GE profile model JVM192K?

Asked 8 years ago by Renfak.

• A:Answer Hello Renfak - All 30" over-the-range microwaves are approximately the same width, and are designed to fit into a 30" wide cabinet opening. Each microwave comes with the mounting hardware (mounting bracket, screws, exhaust adapter), top and rear templates, and installation instructions needed to make installation a simple process. This makes choosing a replacement microwave easy. I recommend this model (http://products.geappliances.com/appliance/gea-specs/PVM9179SKSS). -TREY@GEA

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this microwave work as a replacement for our current built-in PEB7226DF1WW (looks like this one is missing the "1". perhaps it is it the replacement #)? That is, would it fit the same trim plate?

Asked 8 years ago by Lee.

• A:Answer Hi Lee- Thanks for viewing our GE Profile™ Series Microwave Oven PEB7226DFWW! We know you have choices and appreciate the trust you've placed in us. PEB7226DFWW and PEB7226DF1WW are the same and compatible with the same trim kits: GE® Optional 30" Built-In Trim Kit JX7230DFWW, GE® Optional 27" Built-In Trim Kit JX7227DFWW. When the model is manufactured, these extra letters/numbers ("1") are placed on the appliance rating plate and product registration card. These letters/numbers are used to identify manufacturing specific data when the appliance is made. Should service or parts be needed, these are used as identifiers for the specific appliance. Thanks again for your loyalty. Keep in touch! SUE@GEA

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit in the space where we have a JE2160SF02 GEProfile built in we have the trim kit

Asked 8 years ago by Karenp.

• A:Answer Hi Karenp- We certainly appreciate your loyalty! While model PEB7226SFSS is the comparable replacement model, built-in trim kits are not interchangeable. See the following link: http://products.geappliances.com/appliance/gea-support-search-content?contentId=23331 - This model is compatible with GE® Optional 30" Built-In Trim Kit JX7230SFSS and GE® Optional 27" Built-In Trim Kit JX7227SFSS. Check out the Quick Specs at the following link: http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=240379_peb7226sf_c2.pdf - Keep in touch. We are always eager to provide assistance. Sue@GEA

  Answered 8 years ago by GE Answers

  
  Helpful (0)Unhelpful (0)ReportAnswer this question