What’s is the spot size of the Glowforge aura laser? null

Laser dot size or accuracy: The X/Y axis motors can position the beam to within 0.001 in (0.03 mm), which allows the laser to engrave with 1,000 DPI resolution. The laser beam engraves or removes material in a circular pattern. The diameter of the circle is about 0.008 in (0.2 mm), but if you’re cutting, the width of material removed - the “kerf” - varies from 0.008 in - 0.025 in (0.2 mm - 0.6 mm).

What is the accuracy/dot size of the laser? Answer: The X/Y axis motors can position the beam to within 0.001 in (0.03 mm), which allows the laser to engrave with 1,000 DPI resolution. The laser beam engraves or removes material in a circular pattern. The diameter of the circle is about 0.008 in (0.2 mm), but if you’re cutting, the width of material removed - the “kerf” - varies from 0.008 in - 0.025 in (0.2 mm - 0.6 mm).

“What’s is the spot size of the Glowforge aura laser?”

Asked by DrewD 2 years ago

Answer This Question

See all questions & answers

Glowforge - Aura Laser 3D Printer - White-Alt_View_Standard_21

1-3 of 3 Answers

1/8
Answered by JosephB 2 years ago
Sorry, there was a problem. Please try again later.
Laser dot size or accuracy: The X/Y axis motors can position the beam to within 0.001 in (0.03 mm), which allows the laser to engrave with 1,000 DPI resolution. The laser beam engraves or removes material in a circular pattern. The diameter of the circle is about 0.008 in (0.2 mm), but if you’re cutting, the width of material removed - the “kerf” - varies from 0.008 in - 0.025 in (0.2 mm - 0.6 mm).
Answered by Anonymous 2 years ago
Sorry, there was a problem. Please try again later.
What is the accuracy/dot size of the laser? Answer: The X/Y axis motors can position the beam to within 0.001 in (0.03 mm), which allows the laser to engrave with 1,000 DPI resolution. The laser beam engraves or removes material in a circular pattern. The diameter of the circle is about 0.008 in (0.2 mm), but if you’re cutting, the width of material removed - the “kerf” - varies from 0.008 in - 0.025 in (0.2 mm - 0.6 mm).
Answered by Anonymous 2 years ago
Sorry, there was a problem. Please try again later.