A:AnswerThis will not work on a cpap mask as most I checked run above 120 watts peak draw. To determine watts take the rated amps of the device the manufacturer specifies and times it by the voltage. In this case a even a small child’s unit would not work for your purposes purpose.
A:AnswerHello Cobi,
Thank you for your patience with this response. This will all depend on the watt draw from the etoilet. The 200X can output 120 watts continuously. If the etoilet pulls more than 120 watts the 200x will not be able to power it.
A:AnswerHello Leslie,
Thank you for your patience with this response. The 200x can output 120 watts continuously. If your appliances are rated under 120 watts the 200x will be able to power them. The average router pulls about 20 watts. To figure out the run time you divide the watt hours of the battery by the watt load of the router. The 200X has 200 watt hours when fully charged. If the router draws 20 watts continuously the battery will be fully drained in 10 hours.
A:AnswerHello Ebster,
Thank you for your patience with this response. The run time will depend on the watt draw of the grow light. To figure out the run time you divide the watt hours of the battery by the watt load of the light. The 200X has 200 watt hours when fully charged. If the light draws 20 watts continuously the battery will be fully drained in 10 hours.
A:AnswerIf you can keep it charged from your wall outlet then yes. If you meant solar charge I don’t know in your individual case since you would need at least a few sunny days between depletions.
