“I just ordered this turntable and plan to hook it up to my Denon AVR using the phono input. I noticed turntable does not have a ground terminal. Does this unit not need to be grounded?”
Answer This Question
1-4 of 4 Answers
You are having the same problem I am having. When a turntable does not have a ground post (The Insignia does not), you have to do it the old-fashioned way. Loosen one of the chassis screws and attach the ground wire to that. Impossible to do with this Infinity Turntable. Why? Because not one screw on the turntable screws into grounded metal. All the screws go into fiber board. I have come to the conclusion the only way this turntable can be used is with its built in preamp and that is what I am doing. I have it plugged into one of the line-level inputs on my receiver.
Sorry, there was a problem. Please try again later.if you have too much noise there is a lot of tutorials in youtube like adding filters or wired grounded
Sorry, there was a problem. Please try again later.No it does not, I bought this turntable 2 weeks ago and using it with Bluetooth so far, sounds good, didn't try the rca cables yet.
Sorry, there was a problem. Please try again later.Hi New2vinyl, A turntable suffering from a Ground Loop will produce a hum through your speakers. Because of this sensitivity, most turntable designs already arrive with a separate Ground wire attached principally to the tonearm, that can in turn either be attached to the amplifier or phono amplifier's ground screw. Insignia Support Lea https://www.insigniaproducts.com/
Sorry, there was a problem. Please try again later.