Questions & Answers

Q: QuestionIs this compatible with the LG - 43” Class UA7000 Series LED AI 4K UHD Smart webOS TV (2025) ?

Asked 3 months ago by Anonymous.

• A:Answer Hello, Thank you for your question. Yes, this stand is compatible with the LG 43” Class UA7000 Series LED AI 4K UHD Smart webOS TV (2025). The stand supports TVs up to 65 inches with a maximum weight capacity of 60 lbs, which is well within the requirements for a 43-inch model. Andres | Insignia

  Answered 2 months ago by InsigniaCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this stand work with a Samsung - 32” Class Q8F Series QLED 4K UHD SamsungVision AI Smart Tizen TV? And if so how much gap can I adjust for under the tv to accomodate a sonos soundbar?

Asked 3 months ago by dave.

• A:Answer It did not work for me - neither set of screws fit my new Samsung 32 inch QLED TV - one set was too long, and the other set was too short. Needed to shorten the long screws using an electric grinder. There is plenty of room for a soundbar. The stand made the TV sit too far back for my needs. I had to mount the TV backwards to bring it closer to the front of my cabinet which created new issues.

  Answered 2 months ago by LouiseVerified Purchase

  • 
  • 
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs the lowest height of the TV bottom that this stand can be adjusted to 6 inches above the base, or above the cabinet surface? Is this stand compatible with a SONY BRAVIA 8 II 65 inch TV?

Asked 3 months ago by DKLA.

• A:Answer Hello, Thank you for contacting us. The lowest height of the TV on this Insignia stand is 6 inches above the cabinet surface. The stand can support TVs up to 65 inches as long as the TV weighs 60 pounds or less. If your Sony BRAVIA 8 II 65" is within that weight limit and uses standard VESA mounting, it should be compatible. Narendra | Insignia

  Answered 2 months ago by InsigniaCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionHow high is bottom of a 55” tv from the ground

Asked 4 months ago by Fred.

Q: QuestionWhat are the measurements for the base of the stand?

Asked 4 months ago by FooWa35.

Q: QuestionHow high above the tabletop would a 43” Samsung Series 5 tv be? What is the range of possible distances from the base?

Asked 5 months ago by RA17.

Q: QuestionI want to attach a sound bar to the bottom of the TV. What brackets should I use with this stand.

Asked 5 months ago by Anonymous.

Q: QuestionDoes this work with 65" Samsung QLED?

Asked 5 months ago by Anonymous.

Q: QuestionWill this stand work with an LG 55” LED TV? Thanks

Asked 5 months ago by DL86.

• A:Answer Hello! Thank you for your question. Yes, the Insignia TV Stand for Most Flat‑Panel TVs up to 65" will work with an LG 55" LED TV as long as the TV falls within the stand’s supported weight limit and uses a standard VESA mounting pattern, which most LG 55" models do. This stand is designed to fit a wide range of brands and sizes up to 65". Poojitha | Insignia

  Answered 2 months ago by InsigniaCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work well for an LG G5 65"?

Asked 5 months ago by Trey.

• A:Answer Hello Insignia Customer, thank you for your question! Yes, the Insignia™ TV Stand for Most Flat‑Panel TVs up to 65" will work well with an LG G5 65" TV, as long as the TV is 65 inches or smaller and under 60 lbs, which the LG G5 meets. Thank you again for reaching out. Poojitha | Insignia

  Answered 2 months ago by InsigniaCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this compatible with M8 screw type?

Asked 6 months ago by MK.

• A:Answer Hello Insignia Customer, thank you for the question! I appreciate you checking on hardware compatibility before setting up your TV stand. The Insignia™ NS‑HTMS TV Stand is compatible with M8 screws. This stand is designed to support the most common VESA mounting screw sizes of M4, M6, and M8. so it can fit a wide range of flat‑panel TVs up to 65". The correct screw size ultimately depends on your TV model, but the stand itself fully supports M8 hardware. Poojitha | Insignia

  Answered 2 months ago by InsigniaCustomerSupport

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes the stand fit an LG 50” tv?

Asked 6 months ago by Anonymous.

• A:Answer Works with any tv up to 65”.

  Answered 6 months ago by JamesHVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionIs it possible to attach anti-tip straps to this mount stand through the extra slots with nuts and bolts?

Asked 7 months ago by Antitip.

• A:Answer I would think so.

  Answered 6 months ago by JamesHVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan the base be reversed so the majority of the base faces the rear

Asked 7 months ago by Anonymous.

• A:Answer The back only shows 4" x 3" wide. The platform measures about 25 " wide.

  Answered 6 months ago by MeganVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWhat is the minimum height from the table to the bottom of the tv?

Asked 8 months ago by PZ.

• A:Answer My 11 yr old 42" Sony is 4"

  Answered 6 months ago by MeganVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI purchased 32” insignia tv. About $100. But the feet make it hard to fit in my stand. Can this tv stand fit my tv? Can I get I get a discount on price. I thought the feet were a stand in middle? Please advise. This sand is $80 and I pai $100 for tv

Asked 8 months ago by KC.

• A:Answer Ask Best Buy or wherever you bought it.

  Answered 6 months ago by MeganVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionSamsung Model UN65H7150AF - does stand work on this model?

Asked 8 months ago by Anonymous.

• A:Answer Call Best Buy

  Answered 6 months ago by MeganVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionHow do you install the horizontal brackets on the back of the tv?

Asked 8 months ago by Anonymous.

• A:Answer Read the instructions and look at the pictures.

  Answered 6 months ago by MeganVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDo this stand have it's own hardware, nuts and bolts?

Asked 8 months ago by Anonymous.

• A:Answer Yes.

  Answered 6 months ago by MeganVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)