1-3 of 3 Answers
Hi. I have a ResMed 11 and I use the Jackery Explorer 500. I get 4 nights on a full charge. Just make sure not to use the humidifier and that the humidifier setting is OFF. Hope that helps!
Sorry, there was a problem. Please try again later.Is your CPAP powered by USB? If not, then no. The Jackery Explorer 100 Plus only has USB outputs.
Sorry, there was a problem. Please try again later.Dear customer, thank you for your interest in Jackery products. The Explorer 100 Plus is equipped with a 99.2Wh battery capacity, providing a reliable 120-128W output. The ResMed 11 CPAP machine typically consumes around 65W, depending on the settings and any additional features being used, such as humidification. Assuming an average consumption of 65W, the Explorer 100 Plus can provide approximately 1.3 hours of runtime (calculated as: 99.2 × 0.85 ÷ 65). Please note that if your ResMed 11 CPAP machine uses a USB connection, the Explorer 100 Plus can supply power to your device. However, if your CPAP machine uses a wall plug adapter, the Explorer 100 Plus may not be able to provide the required power for your device, as it is not equipped with an AC output port. The actual runtime may vary depending on the specific model and settings used. If you have more detailed information about your ResMed 11 CPAP machine’s power consumption or settings, we’d be happy to provide a more accurate estimate. If you have any further questions, don’t hesitate to contact us (Customer Service: [email protected] / +1-888-502-2236, Weekdays 9AM to 5PM PST). Best regards, Jackery Support Team
Sorry, there was a problem. Please try again later.