Questions & Answers

Q: QuestionHow far from wall is face of TV when mount is fully RETRACTED? Thanks

Asked 9 years ago by Bill.

• A:Answer Approximately 4 inches, including the TV, in this case a Sony XBR-49X800D 4K HDR with Android TV.

  Answered 9 years ago by CleitonVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionCould this mount be secured with a small padlock to prevent theft

Asked 9 years ago by Memoomem.

• A:Answer No, unless you super glue the bolts or weld them to the mount.

  Answered 8 years ago by ScarjVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questionwill this mount work with a ks8500 tv?

Asked 9 years ago by Anonymous.

• A:Answer Most Samsung TV's use a very common 400x400 VESA pattern (bolt pattern) and are fairly light. You shouldn't have any issues but feel free to contact us directly with your TV's full model number using the support button on our website if you'd like us to confirm compatibility, thanks.

  Answered 9 years ago by Kanto Living

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI just purchase 58"samsung from best buy....#...[1] will it pull & tilt left and right as needed.....as needed for my viewing...when I have having parties.....

Asked 9 years ago by dorothyp.

• A:Answer Pull left and right yes. Tilt yes, but tilting requires you to loosen a bolt, tilt to angle you want then retighten.

  Answered 9 years ago by Jodes1977

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionDoes this mount have security capabilities that would makes it hard for a thief to remove the tv from the mounting bracket? Even if it was a lock nut of some kind?

Asked 9 years ago by Security.

• A:Answer The installation of all the support requires tools to tighten screws and nuts, therefore to remove the TV will need the same tools used in the installation. Some support allow the use of a padlock, but this does not guarantee that anyone will cut it to remove the TV.

  Answered 9 years ago by CleitonVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI will be mounting a 75" Samsung, UN75JU6500FXZA, in a recessed area of an entertainment center The studs are on 16" centers. Can the back plate that screws into the wall be moved horizontally to allow the television to be centered in my space?

Asked 9 years ago by Tomterrific.

• A:Answer Tomterrific, The PDX650's wall plate is fairly narrow which doesn't allow you to horizontally shift the wall plate very much. You would be better off with our PDX680 which has a wider 26" wall plate. Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.

  Answered 9 years ago by Kanto Living

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan this mount be used to extend the TV out when in use and back in when off?

Asked 9 years ago by DocH.

• A:Answer DocH, Yes, the mount can extend out and retract against the wall. Contact us directly using the support button on our website if you need help with anything else, thanks.

  Answered 9 years ago by Kanto Living

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill the mount work with this tv? 49LF5100 (LG - 49" Class (48.5" Diag.) - LED - 1080p - HDTV - Black)

Asked 9 years ago by lauren.

• A:Answer lauren, The 49LF5100 has a compatible 300x300 VESA pattern (bolt pattern) and is under the weight capacity of the PDX650, should work great! Feel free to contact us using the support button on our website if you have any additional questions, thanks.

  Answered 9 years ago by Kanto Living

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: Questiondoes this wall mount work with Insignia™ - 55" Class - (54.6" Diag.) - LED - 1080p - HDTV - Black Model: NS-55D510NA17

Asked 9 years ago by Anonymous.

• A:Answer The NS-55D510NA17 has a compatible 200x200 VESA pattern (bolt pattern) and is under the weight capacity of the PDX650, should work great! Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.

  Answered 9 years ago by Kanto Living

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWhat is the weight of this product?

Asked 9 years ago by Anonymous.

• A:Answer The bracket itself is over 20 lbs.

  Answered 9 years ago by MashmanVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this mount work on my 75" Sharp Aquos?

Asked 9 years ago by Mike.

• A:Answer It should work but without knowing the full model number of your TV I cannot be 100% confident. Contact us directly with the model of your TV using the support button on our site and I'll confirm compatibility, thanks.

  Answered 9 years ago by Kanto Living

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionIs this mount compatible with a 50" Sanyo tv?

Asked 9 years ago by Sanyo.

• A:Answer It should work but without knowing the full model number of your TV I cannot be 100% confident. Contact us directly with the model of your TV using the support button on our site and I'll confirm compatibility, thanks.

  Answered 9 years ago by Kanto Living

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: Questionwill this fit a toshiba 43" TV model #46xv645u ?

Asked 9 years ago by need2no.

• A:Answer Hi Need2no, I've looked up your TV's information and it has a 400x400 VESA pattern and weighs 50lbs so it is absolutely compatible with the PDX650. If you have any other questions, please feel free to contact us directly at [email protected] and we'll be happy to help.

  Answered 9 years ago by Kanto Living

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionCan I use extend and stow repeatedly the tv into a closet. so that I can hide the tv when not in use?

Asked 9 years ago by Sony.

• A:Answer Yes, but the closet would need to be rather shallow; i.e. two or three times the delph of a typical medicine cabinet (6-8") and of course beyond the width of the television/monitor.

  Answered 9 years ago by OldcoothomeVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this mount work with a insignia 48 inch standard VESA 200 x 200 !?!?!?!!!! Because I already ordered it and it's going to be here in a couple days !!!!!!!!!

Asked 9 years ago by Michael.

• A:Answer Michael, The PDX650 will work great with a 200x200 VESA pattern, it is compatible with all VESA patterns from 200x100 up to 600x400. If you have any other questions please feel free to contact us directly through the support button on our website and we'll be happy to help.

  Answered 9 years ago by Kanto Living

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionMy man cave that I will be mounting my TV in has no studs, is there anyway I can mount this with anchors in the drywall? Or could Mount it with one stud? and use anchors in the drywall too, I'm going to mount in insignia 48 inch TV

Asked 9 years ago by Michael.

• A:Answer I wouldn't do hang any TV without studs.

  Answered 9 years ago by Jodes1977

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this bracket work with Samsung model UN40KU6300FXZA ? Should I choose to, can the standard Samsung sound bar be also fitted onto the bracket?

Asked 9 years ago by Shinola.

• A:Answer Shinola, The UN40KU6300FXZA has a compatible VESA pattern (bolt pattern) and is under the weight capacity of our mount. You shouldn't run into any issues with your TV and the PDX650! I'm not sure what kind of hardware your sound bar ships with but it's likely you'll need a universal sound bar bracket to attach the sound bar to the mount. If you search Best Buy for "soundbar mount" you'll see a few different options that should work. Feel free to contact us directly using the support button on our site if you have any additional questions, thanks.

  Answered 9 years ago by Kanto Living

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWould this wall mount work if mounted in the studs of the largest wall in a corner?

Asked 9 years ago by Gussie.

• A:Answer yes any wall mount will work if put on a stud, though there is different methods of hanging on stud depending on material (wood or metal). an articulating wall mount (this one) would be best since you can angle it to work with any corner.

  Answered 9 years ago by jeffVerified Purchase

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionI need the TV to swivel 90 degrees from the wall. Can this mount do that? Thanks.

Asked 9 years ago by westiedog1.

This question was asked about the related product: Kanto - Full-Motion TV Wall Mount for Most 37" - 75" TVs - Extends 21.8" - White

• A:Answer YES IT WILL

  Answered 8 years ago by LarryVerified Purchase

  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)