A:AnswerJR, Fortunately curved Samsung TV's do not mount any differently than their flat TV's. You should have no issues with our PDX650 and your Samsung. Contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerSandie,
Every 60" Samsung TV we've encountered in the past few years should work with our PDX650. Most Samsung TV's at that size are under the weight capacity of our mount and use a 400x400 VESA pattern which is quite common. I'm confident that you won't run into any incompatibility issues but feel free to contact us directly using the support button on our site if you'd like us to double check a specific model number.
A:AnswerJorener, Your TV has a compatible VESA pattern (bolt pattern) of 300x300 and is under the weight capacity of the PDX650 so it should work well! Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerLuto1313, Looking at a picture of the back of the TV, it doesn't look like the ports will be covered, but it may also depend which holes on the TV arm you use, so you may have to adjust the TV up or down on the mount if they are obstructed. The mount will hold the TV stable. If you have any other questions, please feel free to contact us directly through the support button on our website and we'll be happy to help.
A:Answerkenzie, Telescoping design means the mount moves in and out from the wall. ThePDX650 is a full motion mount, and moved in and out from the wall, swivels left and right, and moves left and right. If you have any other questions, please feel free to contact us directly and we'll be happy to help.
A:AnswerYES! we just mounted our 55 inch TV my husband thought it would involve a lot to get it done he was so wrong he discovered it was pretty easy, instructions were good and the only time he needed help was when we lifted it up to put in place. Now he just loves it on the wall it does everything we hoped it would do. I love it !
A:AnswerHi, The PDX650 will be 2" from the wall to the back of the TV when it is fully closed. It should work with a 43" Vizio, however if you would like us to let you know for sure, please contact us directly at 1-888-848-2643 or through the support tab on our website and we will be happy to look up your TV's hole pattern and weight.
A:AnswerIf your TV's VESA pattern is 200mm x 200mm and is under the weight limit of 125 lb then it would be compatible. If you could please email us directly at support@kantoliving.com and pass along your TV's full model number and we'll happy to verify it's compatibility.
A:AnswerCat, The PDX650 is low profile and is 2" from the wall when fully pushed back. Please email us directly at support@kantoliving.com if you have any other questions.
A:AnswerDogDoc, Your TV has a compatible VESA pattern (bolt pattern) of 300x300 and is under the weight capacity of the PDX650 so it should work well! Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerSlickV89, Your TV has a compatible VESA pattern of 100x100 and is under the weight capacity of the PDX650, should work well! Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerSamsungMU8000,
Your TV has a compatible VESA pattern of 400x400 and is under the weight capacity of the mount, should work well! Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerDW, Your TV has a compatible 300x300 VESA pattern and is under the weight limit of the PDX650, should work great! Feel free to contact us directly using the support button on our website if you have any additional questions, thanks.
A:AnswerRodJam,
We only list TV sizes as a guideline, as long as your TV is under the 125lb weight limit and has a compatible VESA pattern you'll be fine.
A:AnswerTony,
The PDX650 supports 300x300. Feel free to contact us directly using the support button on our site if you have any additional questions, thanks.
A:Answerrandy,
We typically recommend single stud mounts for corner installations. Our M300 and PS300 would be better choices than the PDX650 which needs to be installed into two studs. Feel free to contact us directly using the support button on our website if you have any additional questions, and we'll be happy to help.
