A:AnswerIf you could please email us directly at [email protected] and pass along your TV's full model number and we would be happy to determine compatibility for you.
A:AnswerUse this one but place a piece of plywood or poplar or if you want to go fancy teak wood, a large square that spans to your 2x4’s that are set 24 in from the center stud. Your making in essence a rectangle solid frame backer wood plate that will be used to anchor this TV mount or any mount you choose. I don’t think any mounts out there are designed to span 24 on center. Usually 16 on center.
Good luck…. hope your handy.
A:AnswerYour TV has a compatible VESA pattern of 400mm x 400mm and is under the weight limit of 125 lbs, it should work great! If you have any other questions or require additional information, if you could please email us directly at [email protected] and we would be happy to help.
A:AnswerThe PDX650 extends up to 21.8” (55.3 cm) from the wall to the ridge of the TV. If you have any other questions or require additional information, if you could please email us directly at [email protected] and we would be happy to help.
A:AnswerMO I’m going to say YES.
I hung a 55” Sony Bravia 90J TV.
Just check the specs again and see if the bracket can hold it. I believe it goes up to 150lbs.
Good luck.
A:AnswerIf you could please email us directly at [email protected] and pass along your TV's full model number and we would be happy to determine compatibility for you.
A:AnswerThePDX650G weighs 22.9 lb (10.4 kg). If you have any other questions or require additional information, if you could please email us directly at [email protected] and we would be happy to help.
A:AnswerIf you could please email us directly at [email protected] and pass along your TV's full model number and we would be happy to determine compatibility for you.
A:AnswerYour TV has a compatible VESA pattern of 300mm x 200mm and is under the weight limit of 125 lbs, it should work great! If you have any other questions or require additional information, if you could please email us directly at [email protected] and we would be happy to help.
A:AnswerIf you could please email us directly at [email protected] and pass along your TV's full model number and we would be happy to determine compatibility for you and assist you further with this.
A:AnswerIf you could please email us directly at [email protected] and pass along your TV's full model number and we would be happy to determine compatibility for you.
A:AnswerThey can mount on metal studs. Make sure you're using proper mounting hardware. Had one of those older heavy wall mount 65" tvs mounted to metal and no issue. Heavier the tv + further off wall your always testing mount and its bracket. Make sure proper size mount and the tvs weight is good for mount you buy. I always add an extra few anchors (wont hurt)
A:AnswerFor off center installation we would recommend our PMX line. The PMX can center your TV on the wall regardless of where your studs are located by adjusting the Kanto PMXs arm assembly left or right. If you have any other questions or require additional information, if you could please email us directly at [email protected] and we would be happy to help.
A:AnswerYour TV has a compatible VESA pattern of 400mm x 300mm and is under the weight limit of 125 lb, it should work great! If you have any other questions or require additional information, if you could please email us directly at [email protected] and we would be happy to help.
A:AnswerYour TV has a compatible VESA pattern of 400mm x 200mm and is under the weight limit of 125 lb, it should work great! If you have any other questions or require additional information, if you could please email us directly at [email protected] and we would be happy to help.
A:AnswerWe recommend the PDX650G for outdoor installation. We can only recommend the installation methods that are in our manual using the provided hardware to install into wood or concrete walls. Metal studs are hollow and do not provide the structure necessary for our lag bolts to grip into. If you have any other questions or require additional information, if you could please email us directly at [email protected] and we would be happy to help.
A:AnswerOnce you’ve found the best viewing angle on the PDX650 you do have to tighten the nuts to secure your TV in place. If you have any other questions or require additional information, if you could please email us directly at [email protected] and we would be happy to help.
A:AnswerIf you could please email us directly at [email protected] and pass along your TV's full model number and we would be happy to determine compatibility for you.
