How do I put this model into descale mode? null

There is a Descale Light button at the bottom that will illuminate when it needs to be descaled

To speed up the process of turning off the descale light and save money only use about 1-1/2 cups of water in both the descale mode and rinse mode. Do not fill up the water reservoir just run the 1-1/2 cups of water until the Add Water light comes on.

Thank you for your question. The complete Use and Care Guide with detailed descaling instructions can be found on the Support page of the Keurig website. We have included them below as well: STEP 1: Prepare the Brewer Pour the entire bottle of Keurig Descaling Solution into an empty water reservoir. Then fill the empty bottle with water and pour into the water reservoir. Do not insert a K-Cup pod. Place a large mug on the drip tray. STEP 2: Descale the Brewer To activate Descale Mode, begin with the brewer plugged in and powered off, then press and hold the 8oz and 12oz buttons together for 3 seconds. When flashing, press the 12oz button to start the descaling process. Once the brew is complete, pour the hot liquid into the sink. Continue to brew until the ADD WATER light illuminates. STEP 3: Fresh Water Rinse Empty the water reservoir, rinse the tank, and refill to the MAX FILL line with fresh water. When flashing, press the 12oz button to start the rinsing process. Once the brew is complete, pour the hot liquid into the sink. Continue to brew 12oz until the DESCALE notification turns off. The brewer has now exited Descale Mode and will be ready for use!

“How do I put this model into descale mode?”

This question is for: Keurig - K-Iced Single Serve K-Cup Pod Coffee Maker - Gray

Asked by Daffy 2 years ago

Answer This Question

See all questions & answers

Keurig - K-Iced Single Serve K-Cup Pod Coffee Maker - White-Front_Standard

$99.99

Save $15

Comp. Value: $114.99

1-3 of 3 Answers

There is a Descale Light button at the bottom that will illuminate when it needs to be descaled
Answered by Oldiesgirl 2 years ago
Sorry, there was a problem. Please try again later.
To speed up the process of turning off the descale light and save money only use about 1-1/2 cups of water in both the descale mode and rinse mode. Do not fill up the water reservoir just run the 1-1/2 cups of water until the Add Water light comes on.
Answered by Anonymous 1 year ago
Sorry, there was a problem. Please try again later.
Thank you for your question. The complete Use and Care Guide with detailed descaling instructions can be found on the Support page of the Keurig website. We have included them below as well: STEP 1: Prepare the Brewer Pour the entire bottle of Keurig Descaling Solution into an empty water reservoir. Then fill the empty bottle with water and pour into the water reservoir. Do not insert a K-Cup pod. Place a large mug on the drip tray. STEP 2: Descale the Brewer To activate Descale Mode, begin with the brewer plugged in and powered off, then press and hold the 8oz and 12oz buttons together for 3 seconds. When flashing, press the 12oz button to start the descaling process. Once the brew is complete, pour the hot liquid into the sink. Continue to brew until the ADD WATER light illuminates. STEP 3: Fresh Water Rinse Empty the water reservoir, rinse the tank, and refill to the MAX FILL line with fresh water. When flashing, press the 12oz button to start the rinsing process. Once the brew is complete, pour the hot liquid into the sink. Continue to brew 12oz until the DESCALE notification turns off. The brewer has now exited Descale Mode and will be ready for use!
Answered by Keurig Care 2 years ago
Sorry, there was a problem. Please try again later.