A:AnswerThanks for your question! The K-Supreme Plus has a 6.25”H mug clearance with drip tray and fits a travel mug up to 7.0” tall with drip tray removed.
A:AnswerThank you for your question! The K-Supreme Plus coffee maker contains a large 78 oz. removable reservoir located on the side. We hope this helps!
A:AnswerThe K-Supreme Plus coffee maker is designed to power on automatically when the handle is lifted. This feature is part of its expected behavior. When you raise the lid, the machine detects this action and powers on, preparing to brew. Thank you for your question!
A:AnswerThank you for your question. All Keurig coffee makers are designed to reduce noise, but there will be some noise initially and as the coffee maker brews. We hope this helps!
A:AnswerThanks for your question! The K-Supreme Plus has a 6.25”H mug clearance with the drip tray in place, and fits a travel mug up to 7.0” tall with the drip tray removed.
A:AnswerThanks for your question! While we don’t have a model where the water path is contained solely to contact with stainless steel, our specifications for all Keurig coffee makers currently being produced require that materials used in the water paths are only industry standard materials that do not contain BPA and meet or exceed Food & Drug Administration guidelines for product safety. Hope this helps!
A:AnswerThank you for your question. The K Supreme Plus has three temperature settings determined by the cup size selected. The in cup temperature on the smallest brew size can start at 160 and go to 172 degrees on the largest cup size. We hope this helps!
A:AnswerThank you for your question! Should a clog arise due to coffee grinds, it can be cleared using a paper clip or similar tool. Please be sure to exercise caution during this process, as the needles are sharp. To begin, please lift the brewer handle and locate the 5 entrance needles on the underside of the lid. To clean out coffee grounds from the entrance needles, hold the brewer handle in the upward position and with your other hand carefully insert a straightened paper clip into the needle. Gently move it around to loosen any coffee grounds; repeat with all needles. To clean out coffee grounds from the exit needle, remove the pod holder assembly and detach the funnel. Locate the exit needle on the inside bottom of the K-Cup pod holder. Insert a straightened paper clip into the exit needle to loosen the clog and push it out. Once all of the needles have been cleaned out, lower the handle completely and run two water-only brew cycles. Do not insert a K-Cup pod. We hope this helps!
A:AnswerHi Bob and thank you for your question. We recommend you only use Keurig brand or licensed/partner brands in your Keurig coffee maker. These meet the Keurig standards for taste, quality and safety, and are tested to perform in our coffee makers. We do not make or test the other brands, so using unapproved pods or accessories may decrease your coffee maker’s performance, overall life and may affect its warranty. If you have any other questions, please feel free to reach out to our Consumer Care team at 866-901-2739.
A:AnswerHave to answer this question properly since I just was faces with this issue.
As stated by previous commentor, you do need to be confident intaking a machine apart and have the rught tools.
Had to this myself since Kuerig would not send me a replacment even though it was just 11 months old so still under warranty.
https://youtu.be/IdE_4NIQEro
