A:AnswerHello, model KRFC300ESS dimensions are Depth 29.375", Height 70.125", and Width 35.75". The dimensions of model KRFC136RPS are Depth 29.375", Height 70.125", and Width 35.75". Thank you for your inquiry about our KitchenAid appliances.
A:AnswerIt should, as long as the fridge's hinges extend beyond to the top edge of your cut out.
Product specifications are:
Height - 70 1/8 inches
Product Width - 35 & 3/4 inches
Height To Top Of Refrigerator (Without Hinges) - 68 7/8 inches
A:AnswerCheck the owner's manual for the phone number to order parts, or find the part number and order it on Amazon or from other appliance parts on-line stores like Parts Direct. However, if you already a whole house water filtration system, you may just want to skip using the filter and instead insert a plug to bypass using the filter. This is what we did. They also sell this plug for this refrigerator and again the same parts stores selling the filters also sell the plugs.
A:AnswerHello. Please visit https://tinyurl.com/2hdpw3f6 and refer to page 8 for electrical information for this model Refrigerator. We hope this information helps.
A:AnswerThe average kitchen counter top is 24-25 inches deep. This fridge is 24" deep from front to back WITH OUT the doors. Allowing for a clearance of at least 2-3 inches from the back of the fridge to the wall to allow for plugging in the fridge to the electric outlet and for your water connection to the water dispenser and ice maker, the fridge's door hinges will be at least 1-2 inches past the edge of the counter top and about 3 to 4 inches past the front edge of typical base cabinets. This means the doors should have an un-impeded swing radius of at least 180°.
A:AnswerLook at the product specifications for it's size. Only 90° of swing radius for the doors, might mean you couldn't open your fruit and veggie bins or the deli drawers.
