1-2 of 2 Answers
It's right in the top right as you're looking at it. It literally says "Water Filter", and a panel you just push, and it pops down. Pull out the old, put in the new, and run a bunch of water through it (I do 2 gallons)
Sorry, there was a problem. Please try again later.Hello Ray, Locate the water filter compartment in the right-hand side of the refrigerator ceiling. Push up to release and lower the compartment door. Turn the water filter counterclockwise (to the left), and pull it straight out of the compartment. Take the water filter out of its packaging and remove the cover from the O-rings. Be sure the O-rings are still in place after the cover is removed. Align the arrow on the water filter label with the cutout notch in the filter housing and insert the filter into the housing. Turn the filter clockwise 90 degrees (¹⁄₄ turn) until it locks into the housing. While the compartment door is still open, lift the filter up into the compartment. Then, close the filter compartment door completely. Flush the water system. We hope this helps.
Sorry, there was a problem. Please try again later.
