1-1 of 1 Answer
Hi there! We understand your inquiry about the trim size for the LG 1.5 cu ft Countertop Microwave (Model MSER1590S). This unit is designed primarily as a countertop model and does not have an LG-compatible trim kit available. If you’d like to inset it into cabinetry for a flush look, you’ll need to build a custom opening that accommodates both the microwave’s outer dimensions and the required ventilation clearances: Microwave Dimensions: Width: 21 7/16 in Height: 12 3/16 in Depth: 17 in Recommended Clearances: Sides: at least 1 in on each side Top: at least 1 in Rear: at least 2 in This means your cabinet opening should be at least 23 ½ in wide × 14 in high × 19 in deep to ensure proper airflow and prevent overheating. Troubleshooting Tip: Before finalizing your cabinetry opening, measure the microwave’s actual footprint and verify that the cabinet walls are square and level. This will help prevent unwanted gaps or binding when sliding the microwave in and ensure the vents on the sides and rear aren’t obstructed during operation. https://www.bestbuy.com/site/lg-1-5-cu-ft-countertop-microwave-with-sensor-cooking-and-smart-inverter-stainless-steel/6577282.p?skuId=6577282 If you need any further guidance on custom installation or have additional questions, please send us a private message on social media @LGUSSupport and we’ll be more than happy to explore possible solutions. —Renzo
Sorry, there was a problem. Please try again later.