“If there is no water hookup, what is needed for the installation of the refrigerator?”
Answer This Question
1-2 of 2 Answers
Just level it and plug it in if you don't need an ice maker.
Sorry, there was a problem. Please try again later.A water supply line IS NOT included with the ENERGY STAR® Certified LG 17.5 17.5 Cu. Ft. Garage Ready Top-Freezer Refrigerator with Reversible Doors - Stainless Steel, Model # LT18S2100S. Our instructions for the water line connection to the refrigerator assume you have an existing water supply connection for the refrigerator. If necessary, you will need to call a qualified plumber to install a water supply line for the refrigerator. You will need Copper or PEX Tubing, with a ¼ in. outer diameter, to connect the refrigerator to the water supply. Both ends of the tubing must be cut square. To determine how much tubing you need, measure the distance from the water valve on the back of the refrigerator to the water supply pipe. Then, add 8 feet (2.4 m). Be sure there is sufficient extra tubing (about 8 feet [2.4 m] coiled into 3 turns of about 10 in. [25 cm] diameter) to allow the refrigerator to move out from the wall after installation. You will also need a ½ in. or adjustable wrench, a Flat-blade and Phillips screwdrivers, and two ¼ in. outer diameter compression nuts and 2 ferrules (sleeves) to connect the copper tubing to the shutoff valve and the refrigerator water valve. If you are using a PEX water line kit, it may already have the required fittings at either end. Full instructions and illustrated diagrams for connecting the water line to the refrigerator can be found in the owner's manual...^Ivan.
Sorry, there was a problem. Please try again later.