“I just bought this Washer. I test it and found it has vibration during the spin procedure. And I didn't put any cloth inside. Could you please let me know how to avoid the vibration? Thanks a lot Andrew”
Answer This Question
1-1 of 1 Answer
The LG 4.3 cu. Ft. Ultra Large Capacity Top Load Washer with Impeller & TurboDrum™ Technology, and SlamProof™ Glass Lid, Model # WT6100CW must be installed on a level, solidly constructed floor capable of supporting the washer without flexing or bouncing. Make sure that the floor is clean, dry and free of dust, dirt, water and oil so the leveling feet cannot slide easily. Leveling feet that can move or slide on the floor can contribute to excess vibration and noise. If the floor has too much flex, reinforce it to make it more rigid. If the floor is not solid, it may cause severe vibration and noise. It must be installed on firm flooring to minimize vibration during the spin cycle. Concrete flooring is best, but a wood floor is sufficient, provided it is built to FHA standards. The floor under the washer must not slope more than 1 inch (2.5 cm) from front to back or side to side. Installing on carpeting and soft tile surfaces is not recommended...^Ivan.
Sorry, there was a problem. Please try again later.