A:AnswerHi there, Marie. Thanks for reaching out about the LG WKE100HVA WashTower! While the WashTower is an incredible appliance for its efficiency and features, it is designed primarily for residential use in standard home environments. Given its size and electrical requirements—120V, 10 Amps for the washer and 240V, 30 Amps for the dryer—it might not be compatible with the typical power supply and space constraints of an RV.
https://www.lg.com/us/washers-dryers/lg-wke100hva-washtower#pdp_specs
If you'd like to explore more compact or RV-specific options, we’d be happy to help! Feel free to send us a private message on social media @LGUSSupport, and we’ll assist you further. —Renzo
A:AnswerYes. It’s most commonly use as not everyone has a perfect set up. It was set up for my old dryer which was on the ground. I’m using Semi-Rigid Silver Flexible Duct connector.
A:AnswerHi there, Josh. When replacing a side-by-side washer and dryer with the LG WKE100HVA WashTower, this unit combines both the washer and dryer into a single unit, so it requires connections for both the washer and dryer.
The washer hookup (water supply) should be connected to the washer side of the unit.
The dryer hookup (venting, power) should be connected to the dryer side of the unit.
This WashTower features a 3-way venting option and requires 240V, 30 amps for the dryer.
https://www.lg.com/us/washers-dryers/lg-wke100hva-washtower#pdp_specs
For more detailed setup instructions, or feel free to reach out to us via @LGUSSupport on social media if you need further assistance.
We’re here to help! —Renzo
A:AnswerHello there! Thanks for your question.
The LG WashTower™ model WKE100HVA is designed as a single integrated unit, combining the washer and dryer into one structure. Unfortunately, if one appliance (washer or dryer) fails, it is not possible to replace just the individual washer or dryer within the unit. You would need to replace the entire WashTower™ system.
This is a feature of the design, as both the washer and dryer are built together with shared components and controls. For service or replacement, we'd recommend contacting LG support or a certified technician for further assistance.
https://www.lg.com/us/washers-dryers/lg-wke100hva-washtower#pdp_specs
If you have any other questions or need further clarification, feel free to reach out to us via @LGUSSupport on social media.
—Renzo
A:AnswerHello there, Tom. Thank you for reaching out. We understand you're having an issue with your WKE100HWA WashTower™ and would like assistance with your 5-year plan.
If you purchased the plan through Best Buy, we recommend contacting Best Buy directly for support. They can assist you with warranty or repair services related to the plan. You can reach them at their customer service number or visit their website for further instructions.
https://www.bestbuy.com/site/lg-4-5-cu-ft-he-smart-front-load-washer-and-7-4-cu-ft-electric-dryer-washtower-with-built-in-intelligence-white/6451042.p?skuId=6451042
However, if you purchased the WKE100HWA WashTower™ directly from LG, we're here to help! Please send us a private message on Social Media @LGUSSupport, and our team will be more than happy to assist you further with troubleshooting or warranty support.
We’re always here to help!
—Renzo
A:AnswerHi there, Marty. Thank you for your inquiry about the LG WKE100HWA WashTower. We understand you're asking about the height of the rear vent from the floor. While the specific height of the rear vent isn't listed directly in the product specs, we can confirm that the WashTower requires a minimum clearance of 4 inches at the back for proper airflow and installation. This clearance is crucial, especially when considering side venting for your setup.
https://www.lg.com/us/washers-dryers/lg-wke100hwa-washtower#pdp_specs
For further assistance or if you need more specific measurements, please send us a private message on Social Media @LGUSSupport, and our team will be happy to assist you.
We appreciate your patience.
—Renzo
A:AnswerHi, Shatri. Thank you for your question. The dryer component of the LG Dryer (WKE100HWA) model supports venting up to 65 feet in length when following the proper installation guidelines. This distance assumes a straight, unobstructed vent path. If the vent includes elbows or turns, the total allowable length will be reduced.
Here’s a quick guideline: 90° elbows reduce the allowable length by 6-8 feet. 45° elbows reduce the length by about 3 feet. To ensure optimal performance and safety, always use rigid or semi-rigid venting material and follow LG's specific venting recommendations in the installation manual. For quick help, you can download its owner's manual through this link: https://www.lg.com/us/support/product/lg-WKE100HWA.ABWEEUS and check page 11 for installation. If you need further clarification, feel free to reach out to us via private message on social media @LGUSSupport. ^Juvy
A:AnswerHello there! Thank you for your inquiry about the LG WKE100HVA WashTower.
We understand you're looking for the door vertical clearance required for installation. Based on the product dimensions, the total height of the WashTower is 74 3/8", and with the door open, the depth is 55". It's important to ensure that there is adequate space in your installation area for the door to open fully, considering this depth.
To allow for easy access to the washer and dryer, we recommend a minimum clearance of about 56" for the door to open properly.
https://www.lg.com/us/washers-dryers/lg-wke100hva-washtower#pdp_specs
For additional questions or assistance, please feel free to send us a private message on Social Media @LGUSSupport. Our team is happy to help!
We appreciate your patience. —Renzo
A:AnswerHi there! Thank you for your question. We understand that you're looking for the model number of the tower stack unit for the WKE100HWA.
The WKE100HWA is the Washtower model, which is a combination washer and dryer unit. However, if you're asking for a stackable washer and dryer option, the WKEX300HBA is another similar model in the Washtower series that features an integrated, space-saving design with a washer and dryer in one unit.
If you need more information about these models or need assistance with any specific setup or compatibility, please feel free to send us a private message on Social Media @LGUSSupport, and our team will be happy to assist you!
https://www.lg.com/us/washers-dryers/lg-wkex300hba-washtower#pdp_specs
We appreciate your patience!
—Renzo
A:AnswerHi there, Gary. Thank you for reaching out with your question about venting capabilities for the LG WashTower™ (Model: WKE100HWA).
The dryer in this model offers 3-way venting, which should provide flexibility for your setup. However, for your specific requirements of venting up to 34 feet with 2 90-degree turns or 32 feet with 3 90-degree turns, it’s important to note that the maximum recommended vent length will depend on factors such as duct diameter, type of material, and the number of turns.
For most dryers, a general recommendation is that venting should not exceed 25 feet with a standard 4-inch vent and fewer turns. If you need to exceed these lengths or the number of turns, it may require using larger ducting or additional vent boosters.
We would suggest consulting the installation manual for the specific venting length recommendations for this model or contacting an installer to ensure your setup is efficient and safe. You can also check if a vent booster fan might help with the extended distance and turns.
https://www.lg.com/us/washers-dryers/lg-wke100hwa-washtower#pdp_specs
Feel free to reach out if you need more details, or send us a message @LGUSSupport if you have any further questions!
—Renzo
A:AnswerI live in an apartment and I have this in my kitchen. I would not say it’s portable, it is all 1 unit and it’s pretty big. But I absolutely love it and I’m happy I purchased it. It cleans well and has many different settings and it dries a full large load in 40 minutes.
A:AnswerHello there! Thank you for your question about the LG WashTower, model WKE100HVA. We understand how important it is to know the origin of your appliances. This model is manufactured in South Korea.
https://www.lg.com/us/washers-dryers/lg-wke100hva-washtower#pdp_specs
If you have any more questions or need further information, please feel free to send us a private message on social media @LGUSSupport. We’re here to assist you!
—Renzo
A:AnswerHello there, thank you for your question about the WKE100HVA. To move your unit for yearly vent cleaning, you should first unplug the appliance from the power source.
Next, gently pull the unit away from the wall, being cautious not to damage any connections. If there are any hoses or ducts, ensure to disconnect them carefully. Once the vent cleaning is complete, you can reattach any hoses and plug the unit back in.
If you need more detailed instructions or assistance, please send us a private message on Social Media @LGUSSupport, and we’ll be happy to help!
Thank you for reaching out!
—Avril
A:AnswerThank you for reaching us regarding LG WashTower. No, the vent hose for the LG WKE100HWA washer/dryer combo is not included and must be purchased separately. You can download its owner's manual through this link for more information: https://www.lg.com/us/support/product/lg-WKE100HWA.ABWEEUS. For additional assistance, please reach out to us on social media @LGUSSupport so we can help you further. ^Cris
A:AnswerThank you for reaching us regarding LG WashTower. Yes, the LG WKE100HWA dryer is equipped with a lint filter. You can download its owner's manual through this link for more information: https://www.lg.com/us/support/product/lg-WKE100HWA.ABWEEUS. For additional assistance, please reach out to us on social media @LGUSSupport so we can help you further. ^Cris
