1-1 of 1 Answer
When the audio on your LG 43” Class UA7000 Series LED AI 4K UHD Smart webOS TV (2025) Model # 43UA7000PUB, drops out and will not come back on, it is typically caused by a digital handshake freeze between the TV's motherboard and your audio source or an incorrect audio format setting. If the audio drops out and stays silent across all apps and inputs, the internal audio processing chip has likely frozen. You can try performing a Motherboard Hard Reset: 1. While the TV is turned on, unplug its power cord directly from the wall outlet. 2. Locate the physical power button on the actual underside frame of the TV and press and hold it down for 30 seconds to fully drain the residual memory capacitors. 3. Leave the TV unplugged for a full 10 minutes. 4. Plug it back directly into the wall (avoiding cheap extension strips) and turn it back on to re-initialize the audio driver. Modern 4K smart TVs use automated audio decoding profiles (like Dolby Atmos or DTS via Auto modes). When streaming apps or HDMI devices shift audio formats between menus and media playback, the handshake can break, resulting in total silence. In this instance, try to force the Codec to PCM Format: 1. Press the Settings gear icon on your remote control and go to All Settings. 2. Select Sound, then navigate to Advanced Settings (or Additional Settings). 3. Click on Digital Sound Output. 4. Change the toggle from Auto or Pass-through to PCM. If you have ever paired a Bluetooth speaker, soundbar, or gaming headset to the TV, the TV may be trying to push the audio to a device that is currently turned off or asleep. Go to Settings > All Settings > Sound > Sound Out and manually check that Use TV Speaker is explicitly ticked...^Ivan.
Sorry, there was a problem. Please try again later.
