“What does it mean when the washer is flashing CL and I can't put the machine on any wash cycle.”
Answer This Question
1-10 of 17 Answers
CL Error Code It is an indicator that the child lock feature is set active. When the child lock feature is active, the control panel will be disabled and settings cannot be adjusted. To fix this: Press and hold the child lock button for 3 seconds.
Sorry, there was a problem. Please try again later.It’s “control lock.” You need to press and hold this label on the panel, and it will reset. This happened to me, and it worked like a charm. Press and hold between 3 – 5 seconds. I must have accidentally brushed up against this when starting my washer.
Sorry, there was a problem. Please try again later.My LG has a start button that activate the door lock on and off I pushed it for3 seconds, then 5 seconds, then one minute, two minutes, … !! Still could not get rid of the CL flashing I plugged and unplugged the machine for multi duration .. no results.. Finally I decided to try pushing the sides buttons : Extra rinse, Deep Fill .. One of these buttons, Delay Wash or Derp Fill when hold down for three seconds or a little over finally SOLVED the problem …!!!!!!! I just got this machine few days ago from HoneDepot… Inthink its computer is messed up ..
Sorry, there was a problem. Please try again later.CL is showing and washer will not turn on
Sorry, there was a problem. Please try again later.I have the LG - 5.5 Cu. Ft. High-Efficiency Smart Top Load Washer with Steam and TurboWash3D Technology – White; Model:WT7900HWA. The user manual says on page 32: “Press and hold the SIGNAL button for 3 seconds to activate or deactivate Control Lock,” but this is an error. Instead, press and hold the TUB CLEAN button for a few seconds. The TUB CLEAN button also has “ *Control Lock ” written in smaller print.
Sorry, there was a problem. Please try again later.This means Control lock not child lock
Sorry, there was a problem. Please try again later.The 'CL' that is flashing on the display for the ENERGY STAR® Qualified LG 5.5 cu.ft. 14-Cycle Smart Wi-Fi Enabled Top Load Washer with TurboWash3D™ Technology, Model # WT7900HBA is indicating that the 'Control Lock' has been enabled. This feature is designed to prevent children from changing cycles or operating the machine. The feature does not lock the lid (door). Once the Control Lock is set, it must be deactivated before any controls, except the Power button, can be used. Once the washer has shut off, the Power button will allow the machine to be turned on, but the controls will still be locked. When the controls are locked, 'CL' will display alternately with the estimated time remaining. Once the controls are locked, they must be manually unlocked to restore operation. Press and hold the Tub Clean button for 3 seconds to activate or deactivate Control Lock. (Operation section on page 32 of your owner's manual)...^IFV
Sorry, there was a problem. Please try again later.My CL light is flashing and the machine won’t cut on
Sorry, there was a problem. Please try again later.Hellp
Sorry, there was a problem. Please try again later.Sorry disregard found the child lock button all is well
Sorry, there was a problem. Please try again later.
