“Do this range required neutral wire. And if does can you do the jump from ground. My existing wire have no neutral.”
Answer This Question
1-1 of 1 Answer
The LG 6.3 Cu. Ft. Self-Cleaning Slide-In Electric Induction Smart Wi-Fi Range with ProBake Convection - PrintProof Black Stainless Steel, Model # LSE4616BD must be installed and grounded on a branch circuit by a qualified technician in accordance with the National Electrical code ANSI/ NFPA NO. 70 - latest edition.All wiring should conform to Local and NEC codes. This range requires a single-phase, 3 wire, A.C 120/208 V or 120/240 V 60Hz electrical system. Use only a 3-conductor or a 4-conductor UL - listed range cord with closed-loop terminals, open-end spade lugs with upturned ends or similar termination. Do not install the power cord without a strain relief. For a 3-wire connection: Power cord, the middle (neutral or ground) wire which is white, of a 3-wire power cord or 3-wire conduit has to be connected to the middle post of the main terminal block. The remaining two wires of the power cord or conduit have to be connected to the outside posts of the main terminal connection block. Failure to do so can result in electrical shock, severe personal injury or death. For a 4-wire Connection: Power Cord, only a 4-conductor power-supply cord kit rated 120/240 volts, 50 amperes and marked for use with ranges with closed-loop connectors or opened spade lugs with upturned ends shall be used. The white middle (neutral) wire of the power cord or 4-wire conduit has to be connected to the middle post of the main terminal block. The other two wires of the power cord or conduit have to be connected to the outside posts of the main terminal connection block. The fourth ground wire (green) must be connected to the frame of the range with the ground screw. Failure to do so can result in electrical shock, severe personal injury or death...^IFV
Sorry, there was a problem. Please try again later.