what voltage required null

All wiring should conform to Local and NEC codes. This range requires a single-phase, 3 wire, A.C 120/208 V or 120/240 V 60 Hz electrical system. Use only a 3-conductor or a 4-conductor UL-listed range cord with closed-loop terminals, open-end spade lugs with upturned ends or similar termination. Do not install the power cord without a strain relief. A range cord rated at 40 amps with 120/240 minimum volt range is required. If a 50 amp range cord is used, it should be marked for use with 13/8" diameter connection openings. This appliance may be connected by means of a conduit or power cord. If a conduit is being used, go to page 21 for 3 wire conduit connections or 4 wire conduit connections. ^Daphane

“what voltage required”

Asked by kinsale 4 years ago

Answer This Question

See all questions & answers

LG - 6.3 Cu. Ft. Smart Slide-In Dual Fuel True Convection Range with EasyClean and ProBake Convection - Stainless Steel-Front_Standard

1-1 of 1 Answer

All wiring should conform to Local and NEC codes. This range requires a single-phase, 3 wire, A.C 120/208 V or 120/240 V 60 Hz electrical system. Use only a 3-conductor or a 4-conductor UL-listed range cord with closed-loop terminals, open-end spade lugs with upturned ends or similar termination. Do not install the power cord without a strain relief. A range cord rated at 40 amps with 120/240 minimum volt range is required. If a 50 amp range cord is used, it should be marked for use with 13/8" diameter connection openings. This appliance may be connected by means of a conduit or power cord. If a conduit is being used, go to page 21 for 3 wire conduit connections or 4 wire conduit connections. ^Daphane
Answered by LG Digital Customer Care 4 years ago
Sorry, there was a problem. Please try again later.