“What amperage circuit is required for this range? What size service wire is required from the breaker to the range?”
Answer This Question
1-1 of 1 Answer
This appliance must be installed and grounded on a branch circuit by a qualified technician in accordance with the National Electrical code ANSI/NFPA NO. 70 - latest edition. All wiring should conform to Local and NEC codes. This range requires a single-phase, 3 wire, A.C 120/208 V or 120/240 V 60 Hz electrical system. Use only a 3-conductor or a 4-conductor UL- listed range cord with closed-loop terminals, open-end spade lugs with upturned ends or similar termination. Do not install the power cord without a strain relief. A range cord rated at 40 amps with 120/240 minimum volt range is required. If a 50 amp range cord is used, it should be marked for use with 13/8" diameter connection openings. This appliance may be connected by means of a conduit or power cord. Additional installation information can be found in the owner's manual which is downloadable here: https://www.lg.com/us/support-product/lg-LTE4815ST#manuals ^CP
Sorry, there was a problem. Please try again later.