“We have a house that's about 1100 sq ft. And a mother in law suite in the back. Window of our house to window of the tiny house is probably 10 feet. Anyone have experience going from building to building with one of these?”
Answer This Question
1-3 of 3 Answers
First, it will depend where you have placed your device. I have one placed on an outside wall as close to my outbuilding as I can get ( I have the 3 device mesh system). My outbuilding is about 65 ft from the closest device. For about 50 ft or so between the buildings I get a good signal. At the outbuilding I had limited signal - sometimes it would connect and sometimes it would not or drop. I already had range extenders from my previous wifi system and when I added a range extender on the house's second floor and one in the outbuilding, I got a good signal in the outbuilding. So I would expect you should have a good signal if you are only 10 ft between the two structures. But once again it depends upon where your wifi device is located in relation to the outbuilding.
Sorry, there was a problem. Please try again later.Hi, mpaisley88. These nodes are designed to cover up to 8100 square feet area. As long as the node in the other apartment can still get at least 3 WiFi bars from the other node, then it should be fine.
Sorry, there was a problem. Please try again later.our house is almost 7000 sq ft and we have no issues with coverage inside or around the house. I'm sure you would have adequate coverage in your guest house with this unit.
Sorry, there was a problem. Please try again later.