A:AnswerThere is only a card, and for a 64G card you will get approximately 256 hours for Single Channel Recording @ VGA Resolution, or 150 hours for Single Channel Recording @ HD(720p) Resolution
A:AnswerThe cameras communication is wireless to the receaver. The receaver does not operate over wifi and to view mobile it has a Ethernet cable that plugs directly into modem and you view it through the app on smartphones or tablets.
A:AnswerNight time viewing is up to 65ft (20m) away in ambient night time lighting conditions and up to 45ft (14m) away in total darkness. The high gain antennas provide up to 150ft (46m) indoor / 500ft (152m) outdoor wireless range. Stated IR illumination ranges are based on ideal conditions in typical outdoor night time ambient lighting and total darkness. Actual range and image clarity depends on installation location, viewing area, light reflection / absorption, building materials and other obstructions in the path of the wireless signal.
A:AnswerYes, you can set the system to record on a loop and keep it in full-time record mode. However, it is designed to only record when triggered by infrared motion detection in 15, 30 and 60 second intervals.
A:AnswerYou can purchase additional cameras - see model number LW2960HAC1. The system is expandable up to 4 cameras. The cameras do not need to be connected to the monitor and each camera comes with a power adapter to be plugged into a nearby electrical outlet for a reliable power source.
A:AnswerThis will not likely work as the cameras must be paired to a monitor. We would recommend purchasing the add-on cameras (LW2770HAC1) instead and if you need to view it from different areas of your house you can connect via the app on your mobile device.
A:AnswerThese cameras must be connected to the included p power adapter for a reliable power source. If you are looking for a camera that has the option for battery as well, you may want to consider the Flir FX.
