“Can the lights be turned off so they do not activate with motion?”
Answer This Question
1-3 of 3 Answers
Not in my experience
Sorry, there was a problem. Please try again later.Hello to all, what would you guys recommend? How long should the motion white light be set at when activated. Example 1 minutes 2 minutes & etc. I thank you guys...
Sorry, there was a problem. Please try again later.Hi Dave, YES, you can control the security lights (super bright white LEDs) and the SIREN individually in the Lorex Mobile (Lorex HOME) App on your mobile device, IF you are using the Lorex NVR along with these cameras. If you are not using the Lorex NVR, then you can still login to the camera directly via it's web management page, and change the settings for the SIREN and SECURITY LEDs. It looks like by default, the camera has the SIREN disabled upon motion but the security LEDS ENABLED upon motion. You can change these settings directly in the camera's management web page. But as I mentioned above, if you are using the full LOREX setup, ie NVR and the mobile app, you have full manual control of both the security LEDs and the SIREN in the app. There are individual buttons on the app for both the SIREN and the LIGHT. And yes, in both the NVR and the App, you can also adjust the settings the control motion, etc, and the settings of the LEDs and SIREN, just as you would if going into the camera page directly. If you are using a 3rd party management program like BlueIris, and not Lorex, then it's up to the developers if they add support to control the toggling of the siren and LED. But as I mentioned, you can at least disable both of them from coming on with motion by configuring directly via the camera's web page. With the full Lorex system you can control it completely. I finally just finished setting up this camera we are speaking of yesterday, along with the Lorex N841 NVR. Setup the mobile App on my phone, it's all working great. So far it seems the 'two-way' audio ONLY works when using the mobile app. I don't think there is any way to do any two-way talk directly from the NVR, you have to be using the app. Hope this helps!
Sorry, there was a problem. Please try again later.