“I just bought this tablet, and I'm looking for a screen protector and case. Most sellers online have cases and screen protectors for the surface go 10inch. Will any of those fit this tablet?”
Answer This Question
1-4 of 4 Answers
OOPS... forgot to say something about a case or cover for the Go2 >> the dimensions of the Go and Go2 are the same, so a case or cover for a Go will fit a Go2 with no problems.... EXCEPT the Go has 10" display size and the Go2 has 10.5" display size - the dimensions of the screen are the same, but the DISPLAY size is larger on the Go2, meaning the bezels (dark edge) of the Go2 are smaller. This is important when using a Go case/cover on a Go2 >> have a close look at a PICTURE of the case or cover you are looking at... I am talking about the Go cases that you want to use for your Go2. LOOK AT THE SCREEN. Some of the cases/covers you will see have a plastic "frame" that holds the cover/case onto the Go. This "frame" often covers the bezel of the screen, usually at the top right/left corners. If you are buying a case/cover with a "frame" that just touches the edge of the 10" Go display, you will immediately find that it COVERS part of the display on the 10.5" Go2. There are case/covers that fit the Go and also the Go2 that do not have these "frames" that could cover the edge of your Go2 display, and this post is to call you attention to LOOK at a picture of the case/cover mounted on a Go with the screen on all the way to the edges (not the hummingbird wallpaper) to be SURE you are not buying a case/cover that will interfere with being able to see the full display on your Go2. If you are in doubt, contact the seller and ask specifically about the Go2 screen. If they say "no problem" be sure you get that in writing and save it until you get delivery and are sure you won't have a problem. Hope this helps! Stay Safe!
Sorry, there was a problem. Please try again later.SCREEN PROTECTOR - HOLD OFF >> hold off on the screen protector until you see one SPECIFICALLY for the new Go2 >> the new Go2 has TWO microphones and the screen protector should have a small hole for BOTH of the microphones. Screen protectors for the Go (original model) will only have ONE hole for the ONE microphone. Covering the second microphone hole with a screen protector (thin glass sheet) would probably muffle the microphone - that's me guessing but I think it's very likely. I made a mistake and ordered a screen protector that was for the original Go and had to return the product. Still waiting for someone to make a screen protector for Go2 available. Not too worried as the keyboard will serve to protect the screen until someone starts selling a screen protector with the additional microphone pinhole. CASE/COVER - GOOD TO GO2 >> dimensions are the same for "old" Go and "new" Go2, so a cover or case should fit the same for either model.
Sorry, there was a problem. Please try again later.UPDATE 6/14/2020 >> at least one tempered glass screen protector is now available for the Go2 that is verified by the manufacturer to have pinholes for BOTH the studio microphones on the Go2. this protector is from a reputable manufacturer, and is on the "best screen protectors" product reviews for several reputable sites. i like to stick with my local BestBuy for items, but they don't have a protective cover for the Go2 posted yet (keep checking if you like), and a screen cover is one of the FIRST THINGS to install on a shiny new technology toy, as an "accident" is called an "accident" because we didn't mean for it to happen, didn't think it would happen, and didn't plan for it to happen, and now because the cat climbed on my lap and impolitely dug her claws into my nether regions and i screamed in pain which scared the bejabbers out of the cat who then jumped on my Go2 and made it flip into the air where it landed on the sharp pointy corner of the coffee table and now the Go2 screen has the new "spider web" effect and that ain't no warranty coverage.... so you may want to do a product search on a large online merchant who shall remain nameless but shouldn't be hard to guess and get your prompt delivery of a tempered glass protective screen cover. i don't like to divert business from Best Buy on their own product review boards... but this is a $12 item and i don't think BBuy will be too upset that customers are protecting their $700 BBuy products by spending less than a Jackson with another supplier. BE SURE you are getting a cover that is SPECIFICALLY for the Go2 (not the "original 2018 Go") or you will end up with a "one hole" cover for a "two microphone" device, and will either need to send it back (like i did - my fault, i didn't think about the second microphone hole when i ordered a protector that was honestly advertised for the original Go) or you will put it on and then realize you ordered the wrong thing and have a nice piece of tempered glass that ain't much good for nuttin, or you will not notice and be running one microphone (it will still work OK) instead of getting the much improved sound from the dual studio microphones on the Go2 to make a good impression on your TEAM and ZOOM and SKYPE video conferences or your little midnight FaceBook Live or SnapChat "pajama parties". wow that was a lot of words all about one little microphone pinhole, but the topic of screen protectors for the Go2 has now been thoroughly covered... so to speak... stay safe!
Sorry, there was a problem. Please try again later.The dimensions for Surface Go 2 are 9.65” x 6.9” x 0.33” are the same for the original Surface Go, which means screen protectors and cases should fit.
Sorry, there was a problem. Please try again later.