1-2 of 2 Answers
Measure the internal GPU mounting clearance in your specific Omen 35L model (there are multiple sub-models). The reported 330mm is a general figure; your particular build might have less clearance due to drive cages, PSU shroud, or front fan structure.Check for adequate power supply capacity and connectors: the card requires a 16-pin 12VHPWR/12V-2×6 adapter/power connector. Ensure your case cooling/airflow can handle the larger card (it’s 3-fan design, tall/heavy). Finally, check the card’s thickness/slot width (it occupies ~2.5 slots) to make sure neighboring components aren’t obstructing. Given the 338mm length vs ~330mm clearance, you would likely run into a tight fit or require removing/trimming something (e.g., repositioning drive cage or front panel) for it to fully seat. If you don’t want to fuss, you might choose a shorter GPU model (e.g., a dual-fan 5070 or other smaller design) to guarantee fit.
Sorry, there was a problem. Please try again later.no, likely too large.
Sorry, there was a problem. Please try again later.
