1-2 of 2 Answers
The speed you get over WiFi depends on a lot of factors: what band you're using, the specific settings in the router, and how much physical material (e.g. walls) are between the router and the client device. Generally, you'll get the fastest speeds when the client device is right next to a router/access point, and speeds go down as you move away from it. One thing to keep in mind is that these units do not have two 5 GHz bands, which means you do not have a dedicated wireless backhaul. The three bands you get are 2.4 GHz, 5 GHz, and the new 6 GHz (used only by WiFi 6E devices). Because of the way Asus' AI Mesh works, which band gets used as a backhaul will change from time to time based on conditions. Whichever band is used as a backhaul can have its throughput cut in half. It is strongly recommended that you use a wired backhaul. Both units have a 2.5 Gbps WAN and a 2.5 Gbps LAN port, which means you can have a wired connection between them that is faster than the standard 1000 base-T. Keep in mind that if there is a switch between these two devices, you'll need to make certain that the switch is 2.5 Gbps. Also, find out if the category of your Ethernet cable can handle 2.5 Gbps. Lastly, if you have any Ethernet devices, you'll definitely need a 2.5 Gbps Ethernet switch, and makes sure the other Ethernet devices (e.g. desktops, laptops, etc.) have a 2.5 Gbps Ethernet NIC. Since you have faster than 1 Gbps from your ISP, this is one of the few routers you can use if you want to get the most out of it, particularly over Ethernet. If you get something else, make sure that the router has both in and out (WAN/LAN) ports that can handle faster than 1 Gbps (1000 base-T), and that your other networking hardware is up to snuff.
Sorry, there was a problem. Please try again later.CAX80 should handle your needs no problem.
Sorry, there was a problem. Please try again later.
