“I have an older 1080p Night Owl system with 8 cameras. Can I reuse the co-ax/power cables from that system with this one, or will I need to use new 4K cables?”
Answer This Question
1-4 of 4 Answers
I reused all my cables from my previous system that I installed 3 years ago, everything works great
Sorry, there was a problem. Please try again later.If, by "co-ax/power cables" you are talking about the "BNC" cables then I would say the chances are very good that they will work just fine. If the old cables were working well with the 1080P system with no "noise" in the picture quality, then I would certainly give it a try. The "1080P cables" are essentially the same cables depending upon copper and insulation quality. I used the same BNC cables when I made a 2K to 4K upgrade and only had to replace one cable on the longest run (100+ feet).
Sorry, there was a problem. Please try again later.Actually the old cables work fine. Installed today.
Sorry, there was a problem. Please try again later.You must use the 4K cables and if connecting to a TV or Monitor it must be 4K.
Sorry, there was a problem. Please try again later.