“HOW TALL AND DEEP (FROM THE WALL) IS THE MACHINE? I AM TRYING TO SET UP A COFFEE BAR AND NEED TO KNOW IF IT WILL FIT UNDER A BUILT IN COUNTER WITH OVERHEAD SHELFS. THANKS FOR YOUR HELP”
Answer This Question
1-5 of 5 Answers
14.5 inches high, 11.5 inches wide, 9.5 inches deep.
Sorry, there was a problem. Please try again later.Product dimensions: 12" W x 9"D x 15"H However, with the frother open (it unfolds from the left side of the machine) the width increases to 15.5", plus you probably need another inch for your cup to fit, so say 16.5". Also, you will need an additional 2" on the top in order to be able to remove the water reservoir. Therefore, your opening should be at least 16.5"W x 9"D x 17"H.
Sorry, there was a problem. Please try again later.The CF091 (which is what I have) is measured as follows: Base is 12" Wide x 9 1/2" Deep (including a "wrap-around" cord-storage at right rear that sticks out about a 1/2" from back) , The Machine is 15" Tall but you will need an extra 1 1/2" approx. to remove the water reservoir or an extra 4" to open the lid on top to fill it with water without removing the reservoir. But if you have close tolerances, it may be easier for you to just remove the reservoir in order to fill since it obviously may be difficult to do if you don't have the space. I ALSO have to note that the unit produces steam from the top through vents, so it may affect the bottom side of your cabinet over time. Or if you have the space, simply slide the whole unit from under your cabinet while brewing. I hope this helps
Sorry, there was a problem. Please try again later.you can set it flush up against the wall and will easily fit under overhead cabinets
Sorry, there was a problem. Please try again later.I just measured mine. It is 15 inches in height to the highest point and 9 inches deep.
Sorry, there was a problem. Please try again later.