How do you take cover off null

This will cover taking the case apart, and putting it back together with your phone. To take it apart: 1) Remove the rubber shell from the plastic case. 2) Turn the case face down, and you will see several points marked with arrows were the front and back of the case snap together. Choose a couple of points to start, and with your fingernails (don't use tools as you may damage or break the case), pull outward, until you feel the front and back of the case begin to separate. To do this, I recommend using two points that are side-by-side, such as a point on the top or bottom, and then the next point over on the side. 3) Once you have a couple of points released, continue working your way around the case until you have all of them released. Putting it all back together: 1) Make sure your phone screen is free of any dirt, dust, or lint, (failure to do so will trap any debris on your screen under the screen protector once the case is reassembled) 2) Start with the front of the case face down. Take your phone and lay it facedown into the plastic shell. 3) Take the back of the case and lay it on the back of your phone. 4) Pick up the entire unit as a whole and begin the work your way around the edges squeezing gently until you hear the clips snap into place. 5) Once all the clips are we secured, reapply the rubber shell, and you are ready to go using your new case.

Simply pull the case off the hooks and remove it.

You have to peel back the rubber from the edge nearest the face toward the back. Then you just seperate the plastic pieces.

“How do you take cover off”

Asked by Frank 8 years ago

Answer This Question

See all questions & answers

OtterBox - Defender Series Case for Apple® iPhone® 6 and 6s - Glacier-Front_Standard

1-4 of 4 Answers

This will cover taking the case apart, and putting it back together with your phone. To take it apart: 1) Remove the rubber shell from the plastic case. 2) Turn the case face down, and you will see several points marked with arrows were the front and back of the case snap together. Choose a couple of points to start, and with your fingernails (don't use tools as you may damage or break the case), pull outward, until you feel the front and back of the case begin to separate. To do this, I recommend using two points that are side-by-side, such as a point on the top or bottom, and then the next point over on the side. 3) Once you have a couple of points released, continue working your way around the case until you have all of them released. Putting it all back together: 1) Make sure your phone screen is free of any dirt, dust, or lint, (failure to do so will trap any debris on your screen under the screen protector once the case is reassembled) 2) Start with the front of the case face down. Take your phone and lay it facedown into the plastic shell. 3) Take the back of the case and lay it on the back of your phone. 4) Pick up the entire unit as a whole and begin the work your way around the edges squeezing gently until you hear the clips snap into place. 5) Once all the clips are we secured, reapply the rubber shell, and you are ready to go using your new case.
Answered by Josh 8 years ago
Sorry, there was a problem. Please try again later.
Simply pull the case off the hooks and remove it.
Answered by Darrenkatytx 8 years ago
Sorry, there was a problem. Please try again later.
with a coin
Answered by kalibestbuy 8 years ago
Sorry, there was a problem. Please try again later.
You have to peel back the rubber from the edge nearest the face toward the back. Then you just seperate the plastic pieces.
Answered by Markb 8 years ago
Sorry, there was a problem. Please try again later.