Questions & Answers

Q: QuestionHow does this interface help with maintaining the audio quality in my vehicle?

• A:Answer This interface helps preserve your vehicle's factory amplified audio system, ensuring quality sound in vehicles equipped with THX or Sony amplifiers.

Q: QuestionDoes this interface retain the steering wheel controls after replacing the factory radio?

• A:Answer Yes, this interface is designed for use with MSCAN databus radios and retains pre-programmed steering wheel controls when you replace the factory radio.

Q: QuestionDoes this interface offer any navigation-related features?

• A:Answer Yes, this interface provides data-controlled accessory and navigation outputs, including vehicle speed sensor (VSS) and reverse trigger, to help ensure efficient operation of navigation systems.

Q: QuestionWhat is the programming style for this radio replacement interface?

• A:Answer The programming style for this radio replacement interface is manual.

Q: Questionwill this work in my 2007 Ford expedition?

Asked 1 year ago by jman.

• A:Answer Yes, this will work in a 2007 Ford Expedition.

  Answered 1 year ago by AAMP Global

  
  Helpful (1)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill this work in a 2003 Lincoln Town Car?

Asked 2 months ago by Mauldin.

• A:Answer No, you do not need an interface for that car, just a simple harness.

  Answered 2 months ago by AAMP Global

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill is work with my 2008 F350 , I have factory radio, no cd, steering wheel controls, no even cruise control. Do I really need this product?

Asked 7 months ago by Parren.

• A:Answer In this vehicle this module is not necessary. You can use a simple radio replacement harness for your install.

  Answered 4 months ago by AAMP Global

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this harness allow backup camera to work?

Asked 9 months ago by Trucker.

• A:Answer This harness does not provide a factory camera signal as most vehicles back then did not have them. However, it does provide a reverse trigger for the aftermarket radio to switch to the camera screen when placed in reverse.

  Answered 4 months ago by AAMP Global

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work on a 2008 Lincoln Navigator with the factory THX sound system

Asked 11 months ago by Cj.

• A:Answer No that will not work with the THX sound system

  Answered 10 months ago by AAMP Global

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill my heated seats and other items work in my 2011 ford edge limited

Asked 1 year ago by Jacko.

• A:Answer Yes all HVAC controls will still continue to function as they are now

  Answered 11 months ago by AAMP Global

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work for a 2011 ford escape

Asked 1 year ago by Hyena.

• A:Answer Yes, this radio replacement harness can be used for replacing the factory radio in a 2011 Ford Escape

  Answered 1 year ago by AAMP Global

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work on 2011 ford fusion with sync and Sony sound system

Asked 1 year ago by Pork.

• A:Answer Yes, this will work in a 2011 Ford Fusion with the factory Sony system. Sync is not retained when replacing the factory radio with aftermarket.

  Answered 1 year ago by AAMP Global

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work on 2006 mustang gt convertible shaker 1000

Asked 1 year ago by Anonymous.

• A:Answer Yes, this radio replacement interface/harness will work when replacing the factory radio in a 2006 Mustang with the Shaker 1000 audio system

  Answered 1 year ago by AAMP Global

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this make it possible to hook up a sub and amp to my factory radio in a 2016 Mazda6

Asked 1 year ago by Anonymous.

• A:Answer This radio replacement interface is used for replacing the factory radio in select Ford vehicles and will not work for adding a subwoofer to the audio system in a 2016 Mazda6.

  Answered 1 year ago by AAMP Global

  
  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)

Q: QuestionWill yhis work for my 2013 ford fusion?

Asked 1 year ago by Joe.

• A:Answer Unfortunately, this radio replacement interface will not work in a 2013 Ford Fusion.

  Answered 1 year ago by AAMP Global

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work for my 2009 Ford F150 FX4 with a stock Sony sound system (just looking to replace the deck)? Will this keep me from getting an error code saying the stereo is not connected?

Asked 1 year ago by Brian.

Q: QuestionDoes this fit a 04 Lincoln Navigator

Asked 1 year ago by FFMC.

• A:Answer Unfortunately, this will not work in a 2004 Lincoln Navigator.

  Answered 1 year ago by AAMP Global

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes it work in ford sport track 2010?

Asked 1 year ago by Antonio.

• A:Answer Yes, this radio replacement interface will work in a 2010 Ford Explorer SportTrac

  Answered 1 year ago by AAMP Global

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this hook up a aftermarket touch screen on a ford expedition limited 2013 ? My purchase a harness from autozone and can not get my steering wheel to work or my camera. Please help

Asked 1 year ago by Dean.

• A:Answer It should. It worked for my 2012 F250. I had Car Toys install it so I did not have to struggle getting the steering wheel controls to work. Sucks it costs $350 but at least my controls and camera work.

  Answered 1 year ago by AaronM

  Helpful (0)Unhelpful (0)ReportAnswer this questionShow more answers (1)