Questions & Answers

Q: QuestionIs this compatible with vehicles that have a factory amplified audio system?

• A:Answer Yes, this interface is designed to preserve your vehicle's factory amplified audio system, including those with standard or premium BOSE amplifiers.

Q: QuestionHow does this interface help with navigation?

• A:Answer This interface provides data-controlled accessory and navigation outputs, including vehicle speed sensor (VSS) and reverse trigger, to ensure efficient operation of navigation features.

Q: QuestionDoes this interface work with most aftermarket stereos?

• A:Answer Yes, this interface is compatible with most aftermarket stereos.

Q: QuestionWhat does this Radio Replacement Interface do?

• A:Answer This Radio Replacement and Steering Wheel Control Interface by PAC allows you to easily replace the factory radio in your GM vehicle while retaining factory features.

Q: QuestionWill this harness work with a Kenwood DDX376BT?

Asked 2 years ago by DJGabby1.

• A:Answer Yes, this harness will work with a Kenwood DDX376BT. Be sure to set the radio selection dial to 3 prior to plugging the interface into the vehicle, and only use the blue/yellow wire for steering wheel controls. Do not connect the 3.5mm jack from the interface to the new radio

  Answered 2 years ago by AAMP Global

  
  Helpful (1)Unhelpful (0)ReportAnswer this question

Q: QuestionDoes this work in a 2013 chevrolet avalanche black diamond edition?

Asked 8 months ago by RJ.

• A:Answer For that vehicle you will need either the RP4-GM31 or RP4-GM32. The model depends on the factory radio. If it has factory navigation then you need the 32, if it does not have factory navigation then you need the 31.

  Answered 4 months ago by AAMP Global

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this fit a 2007 Chevrolet tahoe ltz

Asked 2 years ago by Chris.

• A:Answer Unfortunately, this radio replacement interface will not work in a 2007 Tahoe. You would need the RP5-GM31 for that vehicle

  Answered 2 years ago by AAMP Global

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionIs this picture accurate of what is included? It does not match the picture on the PAC website. The PAC website picture has the correct connections shown, while this one does not even though they are the same model number

Asked 3 years ago by Postie.

• A:Answer The RP4-GM11 interface will come with the correct vehicle specific harness and interface. The one depicted in the photograph is not correct

  Answered 3 years ago by AAMP Global

  
  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill this work on a 2012 chevy silverado

Asked 3 years ago by Anonymous.

• A:Answer You would need a RP5-GM31 for a 2012 Silverado. This interface will not work on that vehicle.

  Answered 3 years ago by AAMP Global

  
  Helpful (0)Unhelpful (0)ReportAnswer this question