Why are the 3 middle green lights flashing? null

Hello Kisst, This is a sign that the unit did not dispenser enough water within the programmed amount of time. You should unplug the unit, remove the brewer drawer and carefully check the upper needle in the unit for clogging. This typically happens when used pods are left in the unit. You should then wipe the needle and use a thin prod (such as a tooth pick or paper clip) to carefully dislodge the clog. Put the tray back, plug in the unit, then attempt to rerun a 10oz cycle (without a pod) when the unit is ready. They will likely see the debris come out with the water. If you have any other questions or concerns, you can reach customer service at 844-237-7466. Thank you - Cassandra P.

I HAVE MY WATER DISPENSER ON IT IS ONE GREEN LIGHT ON ARE ALL THE GREE LIGHTS SUPPOSED TO BE ON

I want to add, thanks to post, I fixed mine... and I couldn't find anything small enough to fit in there, so I used the Vacuum to suck it out... and now it works great... thank you

We had same problem 02/25, found this response about the vacuum and after we had done all the other troubleshooting we still had the problem. We decided to try the vacuum approach and used the syringe that came with our counter ice maker (will post picture below) and it worked perfectly fine after. Thanks for coming back and posting about the success after the vacuum

The three green lights keeps blinking and they do not stop until I disconnected. What does that mean?

The three green lights keeps blinking I disconnected and they stopped. What does that mean?

“Why are the 3 middle green lights flashing?”

This question is for: Primo Water - Bottom-Loading Bottled Water Dispenser - Black/Stainless-Steel

Asked by Kisst 4 years ago

Answer This Question

See all questions & answers

Primo Water - Bottom-Loading Bottled Water Dispenser-Front_Standard

1-6 of 6 Answers

Hello Kisst, This is a sign that the unit did not dispenser enough water within the programmed amount of time. You should unplug the unit, remove the brewer drawer and carefully check the upper needle in the unit for clogging. This typically happens when used pods are left in the unit. You should then wipe the needle and use a thin prod (such as a tooth pick or paper clip) to carefully dislodge the clog. Put the tray back, plug in the unit, then attempt to rerun a 10oz cycle (without a pod) when the unit is ready. They will likely see the debris come out with the water. If you have any other questions or concerns, you can reach customer service at 844-237-7466. Thank you - Cassandra P.
Answered by PrimoWaterCustomerService 4 years ago
Sorry, there was a problem. Please try again later.
I HAVE MY WATER DISPENSER ON IT IS ONE GREEN LIGHT ON ARE ALL THE GREE LIGHTS SUPPOSED TO BE ON
Answered by Anonymous 2 years ago
Sorry, there was a problem. Please try again later.
I want to add, thanks to post, I fixed mine... and I couldn't find anything small enough to fit in there, so I used the Vacuum to suck it out... and now it works great... thank you
Answered by vacuum 1 year ago
Sorry, there was a problem. Please try again later.
We had same problem 02/25, found this response about the vacuum and after we had done all the other troubleshooting we still had the problem. We decided to try the vacuum approach and used the syringe that came with our counter ice maker (will post picture below) and it worked perfectly fine after. Thanks for coming back and posting about the success after the vacuum
Answered by RitaBoricua 1 year ago
Sorry, there was a problem. Please try again later.
The three green lights keeps blinking and they do not stop until I disconnected. What does that mean?
Answered by Anonymous 3 months ago
Sorry, there was a problem. Please try again later.
The three green lights keeps blinking I disconnected and they stopped. What does that mean?
Answered by Anonymous 3 months ago
Sorry, there was a problem. Please try again later.