Questions & Answers

Q: QuestionWhat are the dimensions of the solar panel?

• A:Answer The Renogy 400W Portable Solar Panel is 21 inches wide, 21.6 inches long, and 3 inches tall.

Q: QuestionWhat is the maximum power output of the solar panel?

• A:Answer The maximum power output of this solar panel is 400 watts.

Q: QuestionCan the solar panel be used with a power station?

• A:Answer This Renogy 400W solar panel delivers a strong 36V charge to solar generators.

Q: QuestionWhat is the warranty on the solar panel?

• A:Answer The solar panels have a 5-year warranty.

Q: QuestionIs this panel compatible with the Ecoflow Delta 2 Max? and if it is, does it come with the proper connectors/adapters? Thank you

Asked 2 weeks ago by arecha.

• A:Answer The Renogy 400W Portable Solar Panel Blanket (model RSP400SB‑G3) has an open‑circuit voltage (Voc) of 39.2 V and uses standard MC4 connectors . For compatibility with the Ecoflow Delta 2 Max, you’ll need to check Ecoflow’s DC input specs: The panel’s Voc must be lower than the Ecoflow’s maximum DC input voltage. The panel’s operating voltage (33.6 V) must be above the Ecoflow’s minimum MPPT voltage. If the Ecoflow Delta 2 Max accepts a 39.2 V Voc and MC4 input, it should work. However, the Renogy panel does not include an Ecoflow‑specific adapter — it only comes with MC4 connectors . If your Ecoflow uses an XT60 or other proprietary input, you’ll need an MC4‑to‑Ecoflow adapter cable (sold separately).

  Answered 2 weeks ago by RENOGY

  Helpful (0)Unhelpful (0)ReportAnswer this question

Q: QuestionWill it work all power stations?

Asked 4 months ago by Brian.

• A:Answer The Renogy 400W Portable Solar Panel Blanket (RSP400SB-G3) is compatible with many portable power stations, but it is not universally compatible with all brands or models. Compatibility depends on whether the power station’s DC input voltage and power range match the panel’s output specifications. If the DC input range or capacity falls outside these specifications, it may result in no charging, reduced performance, or potential damage. Additionally, the correct MC4-to-DC adapter cable is required to match the power station’s input port. Tip: Always check your power station’s manual for the supported DC input voltage range, maximum wattage, and connector type before connecting the solar panel.

  Answered 4 months ago by RENOGY

  Helpful (0)Unhelpful (0)ReportAnswer this question