1-1 of 1 Answer
Hi DJS. We appreciate the time you have taken to ask this question. Follow these steps to charge the Ring Quick Release Battery Pack for your doorbell: 1. Remove the security screws: Use the included security screwdriver to remove the security screws located on the bottom of the device. 2. Remove the faceplate or cover: Press in on the sides of the faceplate or cover and pull it out and off. 3. Remove the battery: Press the metal release tab to unlock the battery and slide it out. 4. Charge the battery: Connect the charging cable to the battery's charging port. While charging, your battery displays two colored lights, a solid green and an amber light. Charge the battery until only the green light remains lit. 5. Reinsert the battery: Slide the fully charged battery back into the compartment until it clicks in place. 6. Reattach the faceplate: Place the faceplate or cover back on the device until it clicks, and then reinsert the security screws. 7. Wait for the device to power back on: It can take up to 60 seconds. If any additional information is needed regarding your question, please reach out to our community. Ring Community is our first peer-to-peer community forum, giving our customers the ability to help one another and share their feedback and experiences directly with Ring. Join the Ring Community today! Thank you, Amilia from Ring.
Sorry, there was a problem. Please try again later.
