1-2 of 2 Answers
Yes, you are from a very handy era.
Sorry, there was a problem. Please try again later.Hi Gammy. Thank you for taking the time to ask this question. Yes, the Ring Stick Up Cam Pro is designed to be a DIY home security solution that can be trusted to provide you with lasting coverage. We have included the installation instructions for the Ring Stick Up Cam Pro here: 1. Remove the battery. Twist the battery compartment counterclockwise to unlock and remove the cover. Then, remove the battery and discard the orange battery insulator. 2. Charge the battery. Plug it into a power source using the provided USB cable. Once the battery’s fully charged, only one light on top will glow green. 3. Re-insert the battery. Slide the battery back into the camera until it clicks into place. Twist the battery compartment cover clockwise to lock it and tighten the security screw. For freestanding installation, place your camera on a tabletop or shelf and look at Live View in the Ring app to make sure it’s positioned correctly. If you’d like your camera to have a downward angle, swivel the base around so that the longer side of the base is facing the front and tilt your camera so it points downward. For wall installation, follow these steps: 1. Remove the decorative cover from the camera mount. Use a standard Phillips-head screwdriver (not included) to unscrew the mount and detach it from the rest of the camera. 2. Install the mounting plate. Slide the mounting plate off of the camera mount. Place the mounting plate on the wall with the UP arrow pointing up. If installing on a wood surface, screw the plate directly into the wall. If installing on a masonry surface, mark four screw holes using the plate as a guide. Drill pilot holes using a 1/4” drill bit. Insert the included wall anchors, then drive the four mounting screws through the mounting plate into the wall anchors. WARNING! Only use the included mounting screws when securing the mounting plate. CAUTION! DO NOT drill into your home’s electrical wiring. 3. Mount your camera to the wall. Screw the mount onto the back of the camera. Slide the camera with its mount onto the mounting plate. Tighten the security screw on the camera mount so that it’s firmly attached to the mounting plate. Slide the decorative cover back onto the camera mount and click it into place. 4. Adjust the camera angle. Rotate the camera to focus on the area of your choice. Look at Live View in the Ring app to make sure it’s positioned at your desired angle. Then, tighten the security screw to lock the camera position. If any additional information is needed regarding your Ring Stick Up Cam Pro, please reach out to our community. Ring Community is our first peer-to-peer community forum, giving our customers the ability to help one another and share their feedback and experiences directly with Ring. Thank you, Amilia from Ring.
Sorry, there was a problem. Please try again later.