1-10 of 10 Answers
That’s what I have in it. Works great
Sorry, there was a problem. Please try again later.Lay-Flat Docking Station for 2.5 or 3.5in HDD, SSD https://sabrent.com/products/ec-dflt
Sorry, there was a problem. Please try again later.The key is that your 1 TB hard drive (called a HDD) has to be a SATA (I, II, or III) device and the width has to be 3.5 inches or less (which it should be as 3.5 inch and 2.5 inch are the standard SATA drive sizes). SATA determines the size and arrangement of the contact pins in the back of the drive. Look for "SATA" printed on the label on the drive. This Sabrent docking station will work with any SATA drive (3.5 inch width or less) including HDD and SSD. All of this information is independent of the manufacturer of the drive.
Sorry, there was a problem. Please try again later.It is compatible with a Western Digital 1TB SATA hard drive.
Sorry, there was a problem. Please try again later.As long as the hard drive has a Sata interface, the dock station should be compatible
Sorry, there was a problem. Please try again later.Yes
Sorry, there was a problem. Please try again later.This isn't a case/enclosure. It's a Hard Disk Drive docking station, utilized for reading/writing 2.5" to 3.5" HDD's; usually used for hard drives taken out of older PC's and transferring data over to SSD/eMMC and the like. Photos for reference. Comes with power cable and USB-D 3.0 cable
Sorry, there was a problem. Please try again later.Yep - What I have in mine now. Should slide right in.
Sorry, there was a problem. Please try again later.Yes it does
Sorry, there was a problem. Please try again later.Yes
Sorry, there was a problem. Please try again later.
