is this monitor VESA Mount compatible? null

I am having a very hard time finding mounts that are compatible with their 75mm setup in the back. There is a ridge that is blocking both of my mounts at home. So it would seem that you would need a mounting that is 75mm ONLY, and not 75mm and 100mm like most mounting brackets are. This is a poor VESA design on Samsung's part.

yes it is but you need a monitor mount with 75mm spacing and this one I got from Peerless came with little bushings and longer screws which saved the day because of circular depression on the rear of the monitor. See attached picture

I was able to find a VESA mount that works perfectly with this exact monitor. I am using the Vari brand Dual-Monitor Arm 180 Degree. Like others, I stressed about the 100mm portion of the VESA mount overlapping the lip of the circle but in my case the way the mount was angled ended up completely flush with the monitor at 75mm. My original plan was to order spacers to make it fit but there is no gap between the bracket and the monitor. Don't mind my cable management; I just threw these on there.

please use deeper screwsalong with spacers that come in most mounting kits that will help you. worst come to worst just bend the tip of the mounting bracket

De jure it is VESA compatible, but de facto it is not. You won't be able to find any VESA mount or VESA adapter that will fit this monitor. You need a 75mm ONLY VESA mount, but all the VESA mounts on the market are 75mm and 100mm, so they won't fit.

can it fit on a square mount piece?

It is mountable on a 75mm square mount. I had to buy an aftermarket stand to lower the monitor, since it is a minimum of 4" from the table. I would recommend getting longer screws for your mount and some additional washers to clear the relief. I'm disappointed in the stand that comes with it.

“is this monitor VESA Mount compatible?”

Asked by saimike 5 years ago

Answer This Question

See all questions & answers

Samsung - 28” ViewFinity UHD IPS AMD FreeSync with HDR Monitor - Black-Front_Standard

1-7 of 7 Answers

I am having a very hard time finding mounts that are compatible with their 75mm setup in the back. There is a ridge that is blocking both of my mounts at home. So it would seem that you would need a mounting that is 75mm ONLY, and not 75mm and 100mm like most mounting brackets are. This is a poor VESA design on Samsung's part.
Answered by Gene 5 years ago
Sorry, there was a problem. Please try again later.
yes it is but you need a monitor mount with 75mm spacing and this one I got from Peerless came with little bushings and longer screws which saved the day because of circular depression on the rear of the monitor. See attached picture
Answered by Mark 5 years ago
Sorry, there was a problem. Please try again later.
I was able to find a VESA mount that works perfectly with this exact monitor. I am using the Vari brand Dual-Monitor Arm 180 Degree. Like others, I stressed about the 100mm portion of the VESA mount overlapping the lip of the circle but in my case the way the mount was angled ended up completely flush with the monitor at 75mm. My original plan was to order spacers to make it fit but there is no gap between the bracket and the monitor. Don't mind my cable management; I just threw these on there.
Answered by Alissa 2 years ago
Sorry, there was a problem. Please try again later.
please use deeper screwsalong with spacers that come in most mounting kits that will help you. worst come to worst just bend the tip of the mounting bracket
Answered by Jimster1215 2 years ago
Sorry, there was a problem. Please try again later.
De jure it is VESA compatible, but de facto it is not. You won't be able to find any VESA mount or VESA adapter that will fit this monitor. You need a 75mm ONLY VESA mount, but all the VESA mounts on the market are 75mm and 100mm, so they won't fit.
Answered by Volodymyr 4 years ago
Sorry, there was a problem. Please try again later.
can it fit on a square mount piece?
Answered by Kayden 1 year ago
Sorry, there was a problem. Please try again later.
It is mountable on a 75mm square mount. I had to buy an aftermarket stand to lower the monitor, since it is a minimum of 4" from the table. I would recommend getting longer screws for your mount and some additional washers to clear the relief. I'm disappointed in the stand that comes with it.
Answered by PierreW 1 year ago
Sorry, there was a problem. Please try again later.